Rejigged Workshop

Talk about musical instrument construction, setup and repair.

Moderators: kiwigeo, Jeremy D

Post Reply
User avatar
kiwigeo
Admin
Posts: 10675
Joined: Sat Sep 29, 2007 5:57 pm
Location: Adelaide, Sth Australia

Rejigged Workshop

Post by kiwigeo » Tue Jan 19, 2021 3:15 pm

For the last 18 months the workshop has been packed up during a new house build. Myself and the good wife lived in our garage and the workshop during the build as a cost saving measure. Now that the house is finished Ive been busy getting the workshop back up and running. A temporary bathroom was set up in the garage and this is now a wood store. The cabinet work from the kitchen in the old house has been turned into a large work bench in the main shop.
P1010309.jpg
P1010310.jpg
P1010311.jpg
P1010312.jpg
P1010313.jpg
P1010314.jpg
P1010315.jpg
P1010316.jpg
P1010317.jpg
P1010318.jpg
P1010319.jpg
P1010320.jpg
P1010321.jpg
P1010322.jpg
P1010323.jpg
P1010324.jpg
Martin

User avatar
WJ Guitars
Blackwood
Posts: 384
Joined: Thu Jan 26, 2017 4:28 pm
Location: Sutherland NSW
Contact:

Re: Rejigged Workshop

Post by WJ Guitars » Tue Jan 19, 2021 3:44 pm

The re-setup of your workshop Martin looks great. I also like your wood storage room.

Wayne

seeaxe
Blackwood
Posts: 769
Joined: Thu Dec 18, 2008 7:20 pm
Location: Auckland NZ

Re: Rejigged Workshop

Post by seeaxe » Thu Jan 21, 2021 10:12 pm

I do not see a beer fridge. Obviously still a work in progress....
Richard

User avatar
Mark McLean
Blackwood
Posts: 1121
Joined: Thu Apr 10, 2008 2:03 pm
Location: Sydney

Re: Rejigged Workshop

Post by Mark McLean » Fri Jan 22, 2021 9:35 am

Looking good Martin. I like the separate rooms for the dusty, noisy machines and the clean work. And the store room separate again - that is ideal. The main work room has great natural light, I am very jealous of that. Do you plan to build a go bar deck over one of those benches? Are you trying to manage RH in the whole space, or only in the workroom?

User avatar
kiwigeo
Admin
Posts: 10675
Joined: Sat Sep 29, 2007 5:57 pm
Location: Adelaide, Sth Australia

Re: Rejigged Workshop

Post by kiwigeo » Fri Jan 22, 2021 9:40 am

Mark McLean wrote:
Fri Jan 22, 2021 9:35 am
The main work room has great natural light, I am very jealous of that. Do you plan to build a go bar deck over one of those benches? Are you trying to manage RH in the whole space, or only in the workroom?
The go bar deck can go on either the large bench or the smaller bench. In the old shop this is where I did most of my work. I had a dehumidifier running in the main shop when I first built it but found that with the insulation and door/window seals I didn't really need it. The wood store is well insulated and if necessary Ill pop a small heater in there during the winter months to keep humidity down.
Martin

User avatar
kiwigeo
Admin
Posts: 10675
Joined: Sat Sep 29, 2007 5:57 pm
Location: Adelaide, Sth Australia

Re: Rejigged Workshop

Post by kiwigeo » Fri Jan 22, 2021 9:41 am

LOL.....beer intake has been cut drastically for health reasons of late. The new house has a huge pantry so all the booze is kept there.
seeaxe wrote:
Thu Jan 21, 2021 10:12 pm
I do not see a beer fridge. Obviously still a work in progress....
Martin

User avatar
Lillian
Blackwood
Posts: 1702
Joined: Fri Sep 28, 2007 10:31 pm
Location: New Mexico, USA
Contact:

Re: Rejigged Workshop

Post by Lillian » Mon Jan 25, 2021 2:00 am

Congrats on finishing the house and putting your shop back together. That is a serious stash of wood. That should keep you busy for quite a while. Thanks for the shot of your library. I saw a few books I might go looking for.

What's your first new build going to be?

User avatar
kiwigeo
Admin
Posts: 10675
Joined: Sat Sep 29, 2007 5:57 pm
Location: Adelaide, Sth Australia

Re: Rejigged Workshop

Post by kiwigeo » Thu Jan 28, 2021 5:50 pm

Lillian wrote:
Mon Jan 25, 2021 2:00 am
What's your first new build going to be?
Hi Lillian, the first build? Ive got 3 half finished guitars and a lute that needs a nut and stringing up. Theres a Gore OM, a classical and a parlour guitar and the Gerber lute. Need to finish those first and then move onto some new builds.
Martin

User avatar
Lillian
Blackwood
Posts: 1702
Joined: Fri Sep 28, 2007 10:31 pm
Location: New Mexico, USA
Contact:

Re: Rejigged Workshop

Post by Lillian » Fri Jan 29, 2021 8:53 am

I remember your lute. I was totally blown away by the rosette. I saw it sitting on the bench, but thought you were done with it.

User avatar
kiwigeo
Admin
Posts: 10675
Joined: Sat Sep 29, 2007 5:57 pm
Location: Adelaide, Sth Australia

Re: Rejigged Workshop

Post by kiwigeo » Fri Jan 29, 2021 9:14 am

A multiscale OM commission build took precedence over the lute and I never quite got back to finishing the lute.

Lillian wrote:
Fri Jan 29, 2021 8:53 am
I remember your lute. I was totally blown away by the rosette. I saw it sitting on the bench, but thought you were done with it.
Martin

Post Reply

Who is online

Users browsing this forum: No registered users and 57 guests