Black Heart Sassafras Dreadnought

A place where you can let us see your finished instruments in all their glory.

Moderators: kiwigeo, Jeremy D

Post Reply
Hank
Myrtle
Posts: 74
Joined: Wed Mar 25, 2009 5:20 pm
Location: Cheltenham Melbourne Australia
Contact:

Black Heart Sassafras Dreadnought

Post by Hank » Sat Aug 05, 2017 5:19 pm

This is guitar no 6 and my 2nd dread
Laminated back and sides, Sassafras/US Maple (cross hatched)/Wenge, (first time for me)
finished thickness was around 1.9mm
Top is Englemann Spruce
Neck is NZ Kauri from the CUB Vats
Ebony and maple bindings
Ebony head plate
Gidgee fretboard and bridge
Neck block torrified US Ash
Grover tuners
Bone nut and saddle

Sounds loud and full, but still not as warm as the OM

Finish is Mirotone AC 3606

Cheers Frank
IMG_1854.JPG
IMG_1863.JPG
IMG_1855.JPG
IMG_1853.JPG
IMG_1858.JPG
Without deviation progress is not possible.

seeaxe
Blackwood
Posts: 769
Joined: Thu Dec 18, 2008 7:20 pm
Location: Auckland NZ

Re: Black Heart Sassafras Dreadnought

Post by seeaxe » Mon Aug 07, 2017 7:39 pm

Absolutely stunning. Love, love love that kauri neck. I've got some sassafras to use, I hope it looks that good when I'm finished with it.
Richard

User avatar
lamanoditrento
Blackwood
Posts: 605
Joined: Thu May 05, 2016 9:50 am

Re: Black Heart Sassafras Dreadnought

Post by lamanoditrento » Tue Aug 08, 2017 9:34 am

Beautiful work :cl :cl :cl I think black heart sassafras will be high on the list for my next build
Trent

Hank
Myrtle
Posts: 74
Joined: Wed Mar 25, 2009 5:20 pm
Location: Cheltenham Melbourne Australia
Contact:

Re: Black Heart Sassafras Dreadnought

Post by Hank » Tue Aug 08, 2017 4:11 pm

Thanks Richard and Trent, yep i'm in love with Kauri too! soooo nice to carve,
(made some nice pieces out of Rimu back in the 80's, don't see it much here anymore, be nice for necks?)
I'm a tight ass, so i'm slowly going through everything I have in the workshop, the sassafras was leftover veneer and they only slice the best, that's why the picture is so good, i'm yet to use the real thing but it is on the list
Look forward to seeing your builds

Cheers Frank
Without deviation progress is not possible.

Kamusur
Blackwood
Posts: 754
Joined: Thu Dec 30, 2010 10:08 pm

Re: Black Heart Sassafras Dreadnought

Post by Kamusur » Wed Aug 09, 2017 7:45 pm

Stunning finish Frank. Hope it plays and sounds as nice as it looks.

Steve

Jonny
Wandoo
Posts: 14
Joined: Sun Nov 13, 2016 8:39 pm

Re: Black Heart Sassafras Dreadnought

Post by Jonny » Thu Aug 10, 2017 6:03 pm

Hi Hank,

I am new here so sorry if this questions is silly but...
I thought kauri was a softwood ?How would that hold up long term as a neck :?

Hank
Myrtle
Posts: 74
Joined: Wed Mar 25, 2009 5:20 pm
Location: Cheltenham Melbourne Australia
Contact:

Re: Black Heart Sassafras Dreadnought

Post by Hank » Sat Aug 12, 2017 2:06 pm

Thanks Steve, i'm pleased to say my setups are getting a lot tidier and it does sound like a guitar :lol:

Jonny good question............it was free!..... time will tell i guess
Their are makers in NZ using it for necks, It has similar spec's to Sth Am Mahogany
(I will laminate them from now on though)

Veneer Glue i used was a Franklin (Titebond) product called "Cold Press Veneer Glue" Ordered it thru Carbitec
Used the Bender and heat blanket, Rolled the glue, wrapped it up, put it in the bender and had the blanket up to 60 for and hour
Lots of trial and error :toi

Too much glue and it slides and seeps thru, not enough and you have bubbles,
Fun, but i'm going back to solids, much easier
hope this helps
Cheers Frank
Without deviation progress is not possible.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests