Grinder Scourer / Wire Brush

[Kim Strode]

I have used a heavy scourer on the end of my grinder for many years to clean chisels, etc. The one shown is one that I improvised a while ago as I could not find one on the market that fitted my grinder. Any ideas where I can buy an equivalent. Thanks, Kim

[ckngumbo]

If you know someone that works around a commercial floor scrubber they have a 2/1/2" puchout in the ceter of their pads.
Two or three would do it.

[simso]

any electroplating supplier, there a pretty common thing