Truss Rod Group Buy- Expressions of Interest

Allen · Post by **Allen** » Wed Apr 08, 2009 6:57 pm

As it's been a bit over a year since our last truss rod order, and many of us have used up the stock we laid in, is there any interest in another group buy on Allied's truss rods? We managed to get wholesale pricing on the last order owing to the numbers that we required. A considerable savings if you are considering in getting some for a rainy day.

Let me know approximate numbers and size, then we'll go from there.

If you are new here, and aren't aware, Allied Luthier makes the bees knees of truss rods. You can see their offerings here

http://www.alliedlutherie.com/truss_rods.htm

Bob Connor · Post by **Bob Connor** » Wed Apr 08, 2009 7:34 pm

Funny Allen, I was talking to Micheal Connor today and he was about to do the same thing.

I'm good for 10.

Hesh1956 · Post by **Hesh1956** » Wed Apr 08, 2009 7:55 pm

Darn, darn, darn... I just ordered 12 Allied rods last week......

Anyway I agree - it's the best rod on the market today for a number of reasons:

1) Smooth, precise adjustments using a unique multi-threaded design
2) Stainless steel construction, should last long enough to have beings looking at it 2,000 years from now wondering if it was a urological surgical tool of devious nature....
3) NO PROUD WELD GLOBS that need to be filed down to fit a 1/4" slot like the LMI rod....
4) Weight of LMI rod = 119 grams, weight of Allied rod = 119 grams
5) Designed by Mark Blanchard and Mark is a very bright guy

Taffy Evans · Post by **Taffy Evans** » Wed Apr 08, 2009 7:59 pm

Hi Allen I just missed out on the last purchase, so I'm in for this one. I'll check the site and get back, but possible 10 units.

Dominic · Post by **Dominic** » Wed Apr 08, 2009 8:51 pm

Hey Allen I will be in for 20. I missed the last one.
Cheers
Dom

ozziebluesman · Post by **ozziebluesman** » Wed Apr 08, 2009 10:00 pm

G'day Allen,

Can I order six units please.

3 x 13"
3 x 14 1/4'

Cheers

Alan

kiwigeo · Post by **kiwigeo** » Wed Apr 08, 2009 10:28 pm

Allen wrote:As it's been a bit over a year since our last truss rod order, and many of us have used up the stock we laid in,

Fat chance......20 truss rods still sitting on the shelf at home.

Allen · Post by **Allen** » Thu Apr 09, 2009 5:29 am

Yes Bob, Michael was chatting with me about truss rods, and as I've had the experience and contact with Allied, I volunteered to take this one on again.

We'll let this go through the long weekend, and then see what kind of numbers we are talking about.

The last time we did this we had an order for 102 rods, with an average cost per rod of $12.97 AU plus postage from Cairns.

jeffhigh · Post by **jeffhigh** » Thu Apr 09, 2009 5:58 am

Thanks Allen, I'd be in for 6
3 x 13"
3 x 14 1/4"

Localele · Post by **Localele** » Thu Apr 09, 2009 6:39 am

Quick work Allen, put me down for 10 x 13" and for 10 x 14 1/4".
Looks like the timing is about right from the response so far.

Hank · Post by **Hank** » Thu Apr 09, 2009 10:26 am

Hi Allan

Can I order 3 x 14 1/4" and 3 x 17"?

Haven't ordered with you blokes before and don't know the process,
But hey i've 5 weeks till i'm ready to cut back and polish my first build and the need to start all over again is great,

Cheers Hank

kiwigeo · Post by **kiwigeo** » Thu Apr 09, 2009 10:41 am

Stuff it...Ill take 5 x 13" and 5 x 17" and 3 x 21 3/4" rods thanks Allen.

DarwinStrings · Post by **DarwinStrings** » Thu Apr 09, 2009 10:46 am

Hi Hank, nice to see another new face on the list.

Hi Allen you could put me down for 8 @ 17" and 4 @ 17-3/4" thanks mate.

Jim

Allen · Post by **Allen** » Thu Apr 09, 2009 5:06 pm

In case you are new and aren't aware of how most group buys operate on the forum, here is a little info.

Group buys have been a way for us to pool our buying power into getting a better price on products that most of us use, or at least I use. I've been doing a lot of the leg work, so it's going to be for something that I want in stock.

We get a list of product, and then submit the numbers to the vendor of choice. We get a price back, and I let you know the price with a last chance for everyone to confirm their order. If I can cover the amount then I transfer the funds, and then let everyone know what their total is. Transfers to my bank account are the preferred method of payment. Sometimes the order ends up being so large that I can't and more importantly my wife won't let me cover it. So I await everyone to transfer funds before the order is placed.

Once the order arrives, I re-pack and mail out. When I know the postage from Cairns to you, and any other miscellaneous charges, I'll let you know and you square up with me, or whomever is co-ordinating the purchase.

kiwigeo · Post by **kiwigeo** » Thu Apr 09, 2009 5:40 pm

What the??!! Ya mean WE have to pay for the rods????

Steve · Post by **Steve** » Thu Apr 09, 2009 7:51 pm

Hi Allen,
I'd like to jump on board too - 10 x 14 1/4" please.
Thanks,
Steve

Rod True · Post by **Rod True** » Fri Apr 10, 2009 6:54 am

So......... what's the chance I can get in on the pricing Allen? I could use some but of course am on this side of the pond. How did it work last time? Where there any North American's in on the group buy?

Allen · Post by **Allen** » Fri Apr 10, 2009 7:07 am

Last time around I believe Denis Lehay got in on the order. I let Todd know, and he was drop shipped directly. I haven't contacted Todd this time around yet, but will make an inquiry to see if he's up for it.

Allen · Post by **Allen** » Fri Apr 10, 2009 11:31 am

UPDATE

I contacted Todd at Allied Luthier, and told him the numbers we are looking at ordering.

He tells me that he's got heaps of everything in stock, except the standard length one. Is having some improvements made to them, and just ordered today, so once he knows more, he'll get back to me about pricing difference if any, and when they will be available.

For now he can offer the same pricing we got last time around at $10 US for all rods except the bass ones which will be $11 US. Shipping is on top of this of course.

Dominic · Post by **Dominic** » Fri Apr 10, 2009 1:20 pm

Thanks Allen, to be more specific about my order, I will take

10 x 14 1/4
10 x 17
and better throw in
3 x 21 3/4

Cheers mate
Dom

Mark McLean · Post by **Mark McLean** » Sat Apr 11, 2009 3:24 pm

Hi Allen
I'd like to join you for 3 X 13" and 3 X 14.25"
thanks
Mark

Stu · Post by **Stu** » Sun Apr 12, 2009 8:26 pm

Ripper Allen !!! You little Beauty.

5 @ 14 1/4"
5 @ 21 3/4"
5 @ 17"

Cheers, Stu

Runn3r · Post by **Runn3r** » Mon Apr 13, 2009 11:36 am

put me down for

5 x PTR2WE Truss rod, electric guitar, 17"

thanks

Allen · Post by **Allen** » Mon Apr 13, 2009 5:16 pm

I've got everyones order that has spedified what they want laid out on a spread sheet, and I think that it's pretty well right.

We are at 152 truss rods at the present time. This is going to be approximately $2,200 AU, so I'm going to need everyone to transfer funds to me for their order before I pay for it.

Not just yet, as I'll get confirmation from Allied about availability of stock and final pricing on the standard 14" rods, plus his estimate on shipping. I'll inform you when the time comes. I don't want to be sitting on everyones deposit, then have the order wait for some time if the stock isn't going to be available for some time.

Mark McLean · Post by **Mark McLean** » Mon Apr 13, 2009 7:27 pm

Thanks for putting this buy together Allen. Just let us know when you want to dosh.

Australian/New Zealand Luthiers Forum

Truss Rod Group Buy- Expressions of Interest

Truss Rod Group Buy- Expressions of Interest

Re: Truss Rod Group Buy- Expressions of Interest

Who is online