slight miscalculation

Talk about musical instrument construction, setup and repair.

Moderators: kiwigeo, Jeremy D

Post Reply
jmuller92
Myrtle
Posts: 60
Joined: Tue Sep 09, 2008 6:53 am

slight miscalculation

Post by jmuller92 » Mon Apr 06, 2009 8:17 pm

hey everyone, im a fair way into making my guitar neck, and have just realised i calculated for the nut to be located on the flat part of the neck, just before the angle starts. Is this a problem? will it work the same notched into the flat part?

cheers
Top
User avatar
graham mcdonald
Blackwood
Posts: 473
Joined: Thu Oct 25, 2007 11:57 am
Location: Canberra
Contact:
Contact graham mcdonald

Post by graham mcdonald » Mon Apr 06, 2009 9:10 pm

That is the way most people do it (other than CF Martin) You don't have to notch it in, just leave 5mm or so between the end of the fretboard and the head overlay. It looks a little neater to bevel the end of the head overlay so it is vertical and the nut sits in cleanly

cheers
Graham McDonald
http://www.mcdonaldstrings.com
Top
User avatar
Ron Wisdom
Blackwood
Posts: 420
Joined: Sat Sep 29, 2007 1:18 am
Location: Arkansas, USA

Post by Ron Wisdom » Tue Apr 07, 2009 3:48 am

Yup, what Graham says. All my nuts are on the flat part. :roll:

Ron
Top
Post Reply

Return to “Instrument Builders Forum”

Who is online

Users browsing this forum: No registered users and 192 guests