Sorry it's late, My Rosettes.

Talk about musical instrument construction, setup and repair.

Moderators: kiwigeo, Jeremy D

Post Reply
User avatar
Taffy Evans
Blackwood
Posts: 1067
Joined: Wed Apr 30, 2008 6:54 pm
Location: Charters Towers North Queensland

Sorry it's late, My Rosettes.

Post by Taffy Evans » Fri Oct 02, 2009 7:59 pm

A couple of weeks ago I was asked about how I did the rosettes shown on two recent posts I did of my “Madeleineâ€
Taff
Top
User avatar
Allen
Blackwood
Posts: 5259
Joined: Thu Oct 11, 2007 5:39 pm
Location: Cairns, Australia
Contact:
Contact Allen

Post by Allen » Fri Oct 02, 2009 8:11 pm

Might be old news to you Taffy, but it's given me some ideas that are going to be implemented from now on. Cheers Mate. Thanks for that.
Allen R. McFarlen
https://www.brguitars.com
Facebook
Cairns, Australia
Top
Hesh1956
Blackwood
Posts: 1418
Joined: Thu Sep 27, 2007 9:58 am

Post by Hesh1956 » Fri Oct 02, 2009 10:02 pm

Great looking rosettes Taffy! Using a form is something that I never considered but I will now - thanks!
Top
Joe Sustaire
Myrtle
Posts: 92
Joined: Sun Nov 23, 2008 1:23 am
Location: Talihina Oklahoma
Contact:
Contact Joe Sustaire

Post by Joe Sustaire » Fri Oct 02, 2009 10:43 pm

Some great ideas there Taffy! Doing them in a form first and then sanding them close to thickness. I've run into problems before trying to get a too thick rosette scraped or sanded down in the plate, and buggered the top.

Thanks,
Joe
The only safe thing to do, is to take a chance! Mike Nichols
Top
Post Reply

Return to “Instrument Builders Forum”

Who is online

Users browsing this forum: No registered users and 37 guests