ANZLF Adjustable Neck Joint Group Discussion

[BMS]

So here is the guitar:









Cheers
Benoit

[jeffhigh]

Ok Here is a pic of my neck joint disassembled
The Black strip is 3mmx1mm CF as a bearing strip
The hole in the neck block has a threaded insert installed from the inside.
The bolt is installed from the outside into an enlarged spotfaced hole and doubles as a strap button.
I had to trim a little on the heel face for adjustment range so it is a little rough (shows it is handmade right...)

[jeffhigh]

Just saw this "Triumph" archtop from the 50's ? on ebay
with a stauffer clockkey adjustable neck and an adjustable bridge too

[Allen]

Everything old is new again. Stood the test of time. That's good to know. Thanks for post ing that Jeff.