In fact you should be making your own linings in about 5 minutes.
Johnfm asked about this and I know I showed this somewhere else but I couldn't find it.
I know Kim has a toot for making one with an auto indexer and maybe he'll throw that one up as well (or a link to it).
If anyone has has ideas or variations please throw 'em up here or on a new thread.
Here goes.
Most bandsaws have a mitre gauge.
Screw a spare lump of 2 x 2 or similar to the fence on your mitre gauge as shown in the pic below.
Adjust the bandsaw guides down so that the front of the guides touches the 2 x 2.
Now adjust the blade so it is making the correct depth kerf for your linings.
I make a mark on the 2 x 2 just to the side of the blade at the width that I want the kerfs and simply eyeball as I cut.
The finished product.
