Carbatec

The Vendors and Suppliers Forum is where members are encouraged to post up details of suppliers they have used and had a good experience with. If you have had a bad experience with a vendor then please don't post details of same in this forum as we have no desire to end up being the subject of legal action from a disgruntled supplier...or a member. If you have had an exceptionally bad experience with a supplier then PM or email one of the admins. Note that this forum is not intended as a list of ANZLF sanctioned suppliers...we used to have a forum along these lines but after admins were forced to go into bat to help members resolve issues with a couple of vendors we removed the forum.

Moderators: kiwigeo, Jeremy D

Post Reply
User avatar
Taffy Evans
Blackwood
Posts: 997
Joined: Wed Apr 30, 2008 6:54 pm
Location: Charters Towers North Queensland

Carbatec

Post by Taffy Evans » Sat Aug 05, 2023 11:16 am

Hi, recently my Carbatec dust extractor system died, no go at all. After over 20 years I was not too upset. It had failed to start on its own eight years ago, so I removed the motor cooling fan and fitted a pully to the motor instead, this allowed it to be started with a rope, Lawnmower style.

Anyway, the repairers said it was a capacitor, and after a month's wait, they had not found one. I tried Carbatec and I was amazed to find that they had one in stock. Problem solved. The rope went into the bin.

Good quick service from Carbatec, thanks.
Taff
Taff
Top
Post Reply

Return to “Vendors and Suppliers”

Who is online

Users browsing this forum: No registered users and 29 guests