Vibrational stiffness freq for ukulele?

You can ask questions here about Trevor and Gerard's exciting new book on Luthiery.

Moderators: kiwigeo, Jeremy D

Post Reply
North
Wandoo
Posts: 11
Joined: Mon Feb 17, 2020 10:04 pm

Vibrational stiffness freq for ukulele?

Post by North » Sun Jan 08, 2023 12:56 am

Hi,

Does anyone has any data or suggestions about the vibrational stiffness f of a ukulele build?

Concert or tenor, but everything would be of interest.

I've used 150 with some luck at a concert uke. I derived the number by testing different values of f in my spread sheet, comparing the suggested thickness of the spread sheet to more typical thicknesses around - under the assumption of a 'normal' top stiffness. But as we know, wood varies quite a lot.

pkdz
Gidgee
Posts: 5
Joined: Tue Nov 17, 2015 12:18 am

Re: Vibrational stiffness freq for ukulele?

Post by pkdz » Sun Jan 08, 2023 4:30 pm

I am very interested in any data for Tenor Ukulele

User avatar
Trevor Gore
Blackwood
Posts: 1605
Joined: Mon Jun 20, 2011 8:11 pm

Re: Vibrational stiffness freq for ukulele?

Post by Trevor Gore » Mon Jan 16, 2023 8:43 am

You might find some relevant information in this thread. Otherwise, try to track down Clancy.

pkdz
Gidgee
Posts: 5
Joined: Tue Nov 17, 2015 12:18 am

Re: Vibrational stiffness freq for ukulele?

Post by pkdz » Tue Jan 17, 2023 6:56 am

Thanks for the link Trevor!
I am going to try f=140 on my next Tenor Ukuleles.
The last batch I did had a T(1,1)1 around 179 and a T(1,1)2 around 357
and don't sound bad at all.

North
Wandoo
Posts: 11
Joined: Mon Feb 17, 2020 10:04 pm

Re: Vibrational stiffness freq for ukulele?

Post by North » Thu Jan 19, 2023 8:28 am

Trevor Gore wrote:
Mon Jan 16, 2023 8:43 am
You might find some relevant information in this thread. Otherwise, try to track down Clancy.
Thanks, Trevor!! Lots of good info and sample numbers in that thread!

Post Reply

Who is online

Users browsing this forum: No registered users and 26 guests