.....well here is something quite interesting....if you dont have a modern hydraulic gadget to do it for you....just call your mates and have a dance...
[youtube]https://www.youtube-nocookie.com/embed/ ... Kypg?rel=0[/youtube]
WR
How to drive a pile, ...:)
- woodrat
- Blackwood
- Posts: 1154
- Joined: Tue Nov 25, 2008 6:31 am
- Location: Hastings River, NSW.
- Contact:
How to drive a pile, ...:)
"It's never too late to be what you might have been " - George Eliot
- woodrat
- Blackwood
- Posts: 1154
- Joined: Tue Nov 25, 2008 6:31 am
- Location: Hastings River, NSW.
- Contact:
Re: How to drive a pile, ...:)
"It's never too late to be what you might have been " - George Eliot
- Nick
- Blackwood
- Posts: 3640
- Joined: Thu Feb 26, 2009 11:20 am
- Location: Christchurch, New Zealand
- Contact:
Re: How to drive a pile, ...:)
Another little tip,
If you remove/delete the 's' from the end of the initial part of the address (https) it will embed the vid in your post John,
Like......
youtu.be/
If you remove/delete the 's' from the end of the initial part of the address (https) it will embed the vid in your post John,
Like......
youtu.be/
"Jesus Loves You."
Nice to hear in church but not in a Mexican prison.
Nice to hear in church but not in a Mexican prison.
Re: How to drive a pile, ...:)
Cool....you can vary rate of penetration by varying the number of fat guys on the crew. You can also vary the number of guys on each side you want to a bit of directional drilling....
Martin
Re: How to drive a pile, ...:)
Looking for a new workout routine while out on the rig Martin?
Re: How to drive a pile, ...:)
I just came off a well where those guys would have made us a laughing stock......bit specialist (= salesman) told us his super duper $100,000 PDC bit would cut through the rock like butter. We ended up making 5m/hr and ended up pulling the bit (it was shagged).Allen wrote:Looking for a new workout routine while out on the rig Martin?
Martin
- woodrat
- Blackwood
- Posts: 1154
- Joined: Tue Nov 25, 2008 6:31 am
- Location: Hastings River, NSW.
- Contact:
Re: How to drive a pile, ...:)
[quote="Nick"]Another little tip,
If you remove/delete the 's' from the end of the initial part of the address (https) it will embed the vid in your post John,
Like......
youtu.be/[/quote
Thanks for the tip Nick!....
If you remove/delete the 's' from the end of the initial part of the address (https) it will embed the vid in your post John,
Like......
youtu.be/[/quote
Thanks for the tip Nick!....

"It's never too late to be what you might have been " - George Eliot
Who is online
Users browsing this forum: No registered users and 37 guests