Quandong and Sassafras dreadnought

A place where you can let us see your finished instruments in all their glory.

Moderators: kiwigeo, Jeremy D

Post Reply
mooshalah
Myrtle
Posts: 92
Joined: Tue Feb 01, 2011 2:08 am
Location: Emerald, Victoria

Quandong and Sassafras dreadnought

Post by mooshalah » Thu Jun 30, 2022 2:51 pm

This is a guitar that I'd been working on for some time, as a gift.

I was asked to use the particular materials from which the instrument is constructed, and the colour combination and textures have led me a merry dance! I'm still not quite sure how I feel about it. The binding and purfling were a lot of work to make, in an attempt to tie all the colours together.

The requirement was for a matt finish, so I've used Rustin's Danish Oil.

I used two brass bridge-pins to add a small amount of weight, as "fine tuning" of the bridge, to achieve a T(1,1)2 of 180.4 Hz. The back is not "active", so I didn't try to fiddle around - not that it needed any fiddling, anyway. The frequency response curve shown is of the finished instrument, with strings attached.

In contrast to my reservations about the aesthetic aspects, I'm very happy with the playability and sound properties.

Frank.

Whoops! I should have posted this in "The Gallery". Sorry
Attachments
Quandong 1.jpg
Quandong 2.jpg
Quandong 3.jpg
Quandong 4.jpg
Quandong 5.jpg
Quandong 6.jpg
Quandong 7.jpg
Quandong 8.jpg
Quandong 9.jpg
Spectrum for Quandong guitar.jpg

Dave M
Blackwood
Posts: 595
Joined: Tue Jul 15, 2014 6:44 am
Location: Somerset UK

Re: Quandong and Sassafras dreadnought

Post by Dave M » Fri Jul 01, 2022 1:10 am

Well can't say I go for the colours much either, but it looks to be very well constructed. Detailing is absolutely great.

I guess the purrple heart will tone down in time!


Cheers Dave
------------------
Dave

User avatar
kiwigeo
Admin
Posts: 10582
Joined: Sat Sep 29, 2007 5:57 pm
Location: Adelaide, Sth Australia

Re: Quandong and Sassafras dreadnought

Post by kiwigeo » Fri Jul 01, 2022 11:29 am

LOL...the downside of doing commissions....you don't always build what you think is tasteful in terms of looks. Nice work though...I like the headstock back strap and the front of the headstock looks nice too.
Martin

Gazm
Blackwood
Posts: 132
Joined: Sun Sep 04, 2011 11:25 am

Re: Quandong and Sassafras dreadnought

Post by Gazm » Sat Jul 09, 2022 6:32 am

What a BEAUTY!! Love the colour combination, a gift that will keep on giving pleasure!

What species is the purple bridge/fretboard ??

Well done Frank!

Gaz

mooshalah
Myrtle
Posts: 92
Joined: Tue Feb 01, 2011 2:08 am
Location: Emerald, Victoria

Re: Quandong and Sassafras dreadnought

Post by mooshalah » Sun Jul 10, 2022 10:58 pm

Hi Gazm.

Thanks for the nice words.

The wood is Purpleheart (probably Peltogyne purpurea). Always available at the local branch of the (Melbourne) timber merchant, Mathews Timber.

Frank.

Dave M
Blackwood
Posts: 595
Joined: Tue Jul 15, 2014 6:44 am
Location: Somerset UK

Re: Quandong and Sassafras dreadnought

Post by Dave M » Mon Jul 11, 2022 2:06 am

Frank I would repeat how impressed I am by the craftsmanship.

On further looking I notice you have used brass bridge pins for the top and bottom strings. Was that to change a resonant frequency?


Cheers Dave
------------------
Dave

User avatar
ozziebluesman
Blackwood
Posts: 1529
Joined: Wed Oct 10, 2007 9:12 am
Location: Townsville
Contact:

Re: Quandong and Sassafras dreadnought

Post by ozziebluesman » Mon Jul 11, 2022 9:34 am

Very nice indeed Frank.
I missed this one.
Keep em coming.
Cheers
Alan
"Play to express, not to impress"

Alan Hamley

http://www.hamleyfineguitars.com/

mooshalah
Myrtle
Posts: 92
Joined: Tue Feb 01, 2011 2:08 am
Location: Emerald, Victoria

Re: Quandong and Sassafras dreadnought

Post by mooshalah » Tue Jul 12, 2022 12:59 pm

Hi Dave.

Yes, the two brass bridge-pins were used to slightly weight the bridge, to bring the T(1,1)2 as close as possible to 180 Hz. Had I not done this, and used 6 wooden (ebony) pins, the T(1,1)2 would have been around 181.5 Hz - which would have been OK, but I got all fussy and competitive! I'd bought the brass pins cheaply from China, on eBay, many years ago, but had never used them, so I tried them out to see what happened.

There was no reason to assign the brass pins to any particular strings - I put them on the 1st and 6th strings for the sake of symmetry. Had the new owner of the instrument said they didn't want the brass pins, I would have replaced them with the ebony ones - but it turned out that they were quite happy with the look (perhaps like the proverbial rat with a gold tooth!)

I also tried adding side masses, to move the T(1,1)2, but after experimentation and calculation, realised that I was going to have to add more than 350 grams to the weight of the instrument, in order to effect the desired change. By comparison, a little extra weight added directly to the bridge, went a long way.

Frank

Post Reply

Who is online

Users browsing this forum: No registered users and 29 guests