Pineapple Tenor in Blackwood and Sitka Spruce
Posted: Mon Jun 10, 2013 6:49 am
This is my first left handed instrument, and I found I had to keep reminding myself through the entire build so as not to stuff something up. Stringing it up proved to be more difficult than I would have though as with re-entrant tuning it's really easy to mix up the 1st and 4th strings, along with tuning them to the correct pitch. Can really make you feel dyslexic.
Back and Sides - Australia Blackwood
Top - Bear Claw Sitka Spruce
Bindings - Blackwood
Fret Board - Ebony with 12" radius
Peg Head Overlays - Ebony
Neck - Blackwood with CF truss rod
Tuners - Gotoh
Bridge - Gidgee
Rosette - Spalted Avocado
Finish - Mirotone
Strings - South Coast Ukes
Back and Sides - Australia Blackwood
Top - Bear Claw Sitka Spruce
Bindings - Blackwood
Fret Board - Ebony with 12" radius
Peg Head Overlays - Ebony
Neck - Blackwood with CF truss rod
Tuners - Gotoh
Bridge - Gidgee
Rosette - Spalted Avocado
Finish - Mirotone
Strings - South Coast Ukes
- robert_zammit.jpg (38.1 KiB) Viewed 3962 times
- robert_zammit-2.jpg (39.88 KiB) Viewed 3962 times
- robert_zammit-3.jpg (75.45 KiB) Viewed 3962 times
- robert_zammit-4.jpg (40.98 KiB) Viewed 3962 times
- robert_zammit-5.jpg (43.69 KiB) Viewed 3962 times
- robert_zammit-6.jpg (47.74 KiB) Viewed 3962 times
- robert_zammit-7.jpg (72.79 KiB) Viewed 3962 times