Paul's Blackwood and Red Spruce Baritone Ukulele

A place where you can let us see your finished instruments in all their glory.

Moderators: kiwigeo, Jeremy D

Post Reply
User avatar
Allen
Blackwood
Posts: 5252
Joined: Thu Oct 11, 2007 5:39 pm
Location: Cairns, Australia
Contact:

Paul's Blackwood and Red Spruce Baritone Ukulele

Post by Allen » Sun Aug 19, 2012 2:33 pm

There seems to be a bit of a run on these Baritone Ukuleles at the moment. While I really enjoy the challenge of doing a commission, one from a returning client is rather special, and after some settling in so I can check that everything is as it should be, it will be shipped off down south.

Specifications for this build were to be Blackwood with a bit a flash of heart wood on the back. This was the last set I had to meet that criteria. Was from about 10 guitar sets I bought from Bob some time ago now. Baritones chew up a lot of that wood in a set, but I can usually squeeze a smaller uke out of the off cuts.

A guitar like finger picking sound was also a specification, and for me that says Red (Adirondack) Spruce. The rest was up to me. I always like that part. Lets me pick through the stash and get creative.

As well, Paul wanted to tune this instrument in C as a regular ukulele. No problem there as the South Coast Linear string set I have for Baritones fits the bill. BTW, the South Coast strings are the best strings I've ever heard and will be the standard for all my ukuleles from now on.

So enough of the preamble. Specs are as follows.

Back and Sides - Blackwood
Top - Adirondack Spruce
Neck - Spanish Cedar with CF truss rod
Bindings - Figured Blackwood
Fret Board - Ringed Gidgee
Bridge - Ringed Gidgee
Head Plate and Back Graft - Ringed Gidgee
Rosette - Koa and black dyed maple veneer
Finish - Mirotone 3220 gloss over Boat Coat epoxy pore filler
Tuners - Grover Sta-tites 14:1
Strings- South Coast Ukulele linear set
The attachment Barron River Ukulele-Baritone 371.jpg is no longer available
Barron River Ukulele-Baritone 373.jpg
Barron River Ukulele-Baritone 380.jpg
Barron River Ukulele-Baritone 379.jpg
Barron River Ukulele-Baritone 375.jpg
Barron River Ukulele-Baritone 372.jpg
Barron River Ukulele-Baritone 383.jpg
Barron River Ukulele-Baritone 376.jpg
Barron River Ukulele-Baritone 381.jpg
Allen R. McFarlen
https://www.brguitars.com
Facebook
Cairns, Australia

foxfair
Gidgee
Posts: 9
Joined: Sun Feb 12, 2012 9:09 pm
Location: Sydney NSW

Re: Paul's Blackwood and Red Spruce Baritone Ukulele

Post by foxfair » Sun Aug 19, 2012 3:40 pm

Nicely done Allen, if you like Southcoast strings you should also try Ken's Living Water Strings.
It is similar with SC tonally, but I think LWS is more balanced in other areas.
Howard

User avatar
56nortondomy
Blackwood
Posts: 676
Joined: Sat Jan 14, 2012 11:56 pm
Location: Melbourne western suburbs

Re: Paul's Blackwood and Red Spruce Baritone Ukulele

Post by 56nortondomy » Sun Aug 19, 2012 4:44 pm

Very nice uke Allen, production seems to have slowed a bit you must be getting more sleep. Wayne

User avatar
Allen
Blackwood
Posts: 5252
Joined: Thu Oct 11, 2007 5:39 pm
Location: Cairns, Australia
Contact:

Re: Paul's Blackwood and Red Spruce Baritone Ukulele

Post by Allen » Sun Aug 19, 2012 4:58 pm

Have a class of 5 students doing scratch builds right now. It's taking up an awful lot of my time, but I do have about a dozen instruments on the go. Just got to get some time to devote to them.
Allen R. McFarlen
https://www.brguitars.com
Facebook
Cairns, Australia

User avatar
J.F. Custom
Blackwood
Posts: 779
Joined: Fri May 01, 2009 9:13 pm
Location: Brisbane
Contact:

Re: Paul's Blackwood and Red Spruce Baritone Ukulele

Post by J.F. Custom » Sun Aug 19, 2012 7:47 pm

Very nice Allen, which frankly, is to be expected. :wink: :D

Beautiful striking colour in the blackwood and the ringed gidgee suits as well.

Always a nice compliment to get return customers... 8)

Jeremy.

lauburu
Blackwood
Posts: 229
Joined: Sun Oct 17, 2010 7:25 am
Location: Auckland NZ

Re: Paul's Blackwood and Red Spruce Baritone Ukulele

Post by lauburu » Mon Aug 20, 2012 6:40 am

Absolutely beautiful, Allen. Another work of art.
Haven't heard the South Coast Strings yet but am trying a set of Living Water strings on a tenor. Price is very agreeable and postage very cheap. About $NZ35 for 2 sets of strings including postage - arrived within a week. Bright, crystal clear sound, well balanced across all strings and settled down very quickly.
Miguel

User avatar
H3ytm@n
Blackwood
Posts: 149
Joined: Sat Jun 25, 2011 12:09 pm

Re: Paul's Blackwood and Red Spruce Baritone Ukulele

Post by H3ytm@n » Mon Aug 20, 2012 10:03 am

Very very nice. Looks like you've changed the shape a bit. I like it a lot!!
Mike

Post Reply

Who is online

Users browsing this forum: No registered users and 88 guests