Scarf Joint

Moderators: kiwigeo, Jeremy D

Post Reply
Dave M
Blackwood
Posts: 494
Joined: Tue Jul 15, 2014 6:44 am
Location: Somerset UK

Scarf Joint

Post by Dave M » Sat Sep 04, 2021 3:07 am

In the recent GAL Mark French talks of working in Charles Foxes workshop. In the article I noticed Charles' jig for cutting the scarf joint in his headstocks on the bandsaw. I decided I just had to have one. I have been doing them freehand but that means a fair bit of cleaning up with a plane afterwards.

These jigs running in the slides on my machines always seem to take a long time to do. For a start all the slides are different sizes and shapes. And the runners always seem to stick and need a lot of sanding ot get right.

Anyway got it done today and it works a treat. It is adjustable so different angles can be done and it wil be very useful for other angled cuts - such as making wedges which I seem to use quite a lot.
Attachments
scarf 3 small.jpg
scarf 2 small.jpg
scarf1 small.jpg
------------------
Dave

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests