Page 1 of 1

Automatic Kerfing Machine

Posted: Sat Oct 10, 2015 10:23 pm
by timbuck
I been away from the Forum for a while so I'll update on what i'm up...I've been building this Automatic Kerfing Gizzmo to fit on the bandsaw...Finaly got hold of the motor to completed the prototype and get it working...One problem i've come across is the drawer slides are vunerable to sawdust and can get clogged up so I recommend some sort of covers or tape to stop the dust getting in.
Here is the final video of it in action.
https://www.youtube.com/watch?v=7YY_gtOCWrg
I'm thinking of making a few of these in the future and have already got another part done (a Deluxe version) This time i'm using linear bearings to get around the dust problem. here are a couple of pic's of the progress of Mark II
Image
Image

Re: Automatic Kerfing Machine

Posted: Sun Oct 11, 2015 8:05 pm
by needsmorecowbel
awesome :lol: "110 kerfs per minute"

Re: Automatic Kerfing Machine

Posted: Mon Oct 12, 2015 2:02 am
by timbuck
It took 1 hour and 20 minutes (including a tea break) to Kerf 120 pc's linings at approx 16 inch long Thats 160 ft ... enough to make 30 ukulele's :)

Re: Automatic Kerfing Machine

Posted: Mon Oct 12, 2015 8:35 am
by Nick
Now that I'm impressed with! It appeals to my engineering genes, needs to be a bit more "steampunk" though :wink: :D Excellent job Ken :cl :cl :cl :cl :cl

Re: Automatic Kerfing Machine

Posted: Mon Oct 19, 2015 1:19 am
by timbuck
Finally I got all the parts together and completed MK II...Tested it out today and it works just how it should. I've started work on two more.
I'll most likely sell this one but it won't be cheap .. But it will soon pay for itself if you plan to sell linings :) it will handle strips up to 10mm in height, but that can be increased by fitting riser plates under the top board and cam...Here are some more pic's
Image
Image
Image

Re: Automatic Kerfing Machine

Posted: Tue Oct 27, 2015 8:22 pm
by simso
How much??

Re: Automatic Kerfing Machine

Posted: Wed Oct 28, 2015 6:24 am
by timbuck
I just sold one by auction on eBay UK and it went for £ 340 ...more than I expected ..and it went to a boat builder. :D

Re: Automatic Kerfing Machine

Posted: Sat Oct 31, 2015 6:51 pm
by routout
Very nice beat the hell out of my pencil line and stop ops I missed one ,my engineering background says a lot of thought has gone into your set up congratulations on the effort.

Re: Automatic Kerfing Machine

Posted: Sun Nov 01, 2015 7:14 pm
by kiwigeo
It's a nice looking bit of kit but it's missing something.......a built in mini nuclear reactor.

Re: Automatic Kerfing Machine

Posted: Wed Nov 25, 2015 2:23 am
by timbuck
Made Six .... got three spare :D ...Now back to some woodworking :wh
Image

Re: Automatic Kerfing Machine

Posted: Mon Jun 12, 2017 9:37 am
by ar merrell
I know this is an older post and I am new here but I am interested in building one and would like to know what motor you are using . I have found a 30 rpm ac 110 volt on ebay that looks similar but not sure . Would you care to share some information on this unit you have built. This is a very nice unit.
Allen R Merrell

Re: Automatic Kerfing Machine

Posted: Tue Jun 13, 2017 11:17 pm
by timbuck
This is the link to the motor ...You can get a bracket as well .
http://www.ebay.co.uk/itm/110RPM-50Hz-7 ... Swx6pYq6PN
I found mine on Amazon here https://www.amazon.co.uk/sourcingmap%C2 ... B00DCAP4L0