Stewmac rosette cutter mods

[jeffhigh]

You are viewing a re-constructed thread by the ANZLF recovery team. For more information click here.

"Originally Posted on:Thu Sep 02, 2010 1:50 pm"


Well I had to cut a 44mm hole and a 60mm rosette for a batch of sopranos.
Too small for the stewmac rig so....
Drill 2 new mounting holes 20mm in from the existing
cut a slot to pass the bit
bevel off the slider end
Works fine

100_0254.jpg (119.59 KiB) Viewed 6061 times

[Allen]

Did the exact same mod to mine last year Jeff. don't know why they haven't done a redesign on this to accommodate ukes, mandolins etc.




This is the final re-constructed message of this topic posted by the ANZLF help team.