Cherry and WRC Parlour sprectra question

Talk about musical instrument construction, setup and repair.

Moderators: kiwigeo, Jeremy D

Post Reply
User avatar
Francis
Myrtle
Posts: 74
Joined: Sat May 28, 2016 1:44 am
Location: Kingstone, Hereford. UK
Contact:

Cherry and WRC Parlour sprectra question

Post by Francis » Mon Oct 31, 2016 3:56 am

I'm working on a small parlour which is currently at the closed box stage - neck/bridge not fitted. Tried some tap tests at the bridge position using a phone app. Would like comments on the spectra please:
Image
Image
The guitar so far:
Image
Soundboard is Falcate braced with CF top and bottom of all braces. Back is radially braced.

Other images of the build/bracing can be seen here: http://milsomguitars.weebly.com/heathers-parlour.html

johnparchem
Blackwood
Posts: 547
Joined: Mon Jan 21, 2013 2:59 am
Location: Seattle
Contact:

Re: Cherry and WRC Parlour sprectra question

Post by johnparchem » Mon Oct 31, 2016 7:41 am

Do you think the 209 Hz is the top? With a parlor I suspect the 239 Hz is the top resonance T(1,1)2 before the bridge and strings. Also the 239 Hz peak is taller than the 209 Hz. I wonder if the back resonance is lower than the top. Nice looking guitar.

User avatar
Francis
Myrtle
Posts: 74
Joined: Sat May 28, 2016 1:44 am
Location: Kingstone, Hereford. UK
Contact:

Re: Cherry and WRC Parlour sprectra question

Post by Francis » Mon Oct 31, 2016 8:03 am

John - I'm not sure - the back before closing didn't sound lower than the back - though I dodn't take any spectra at that stage.

User avatar
lamanoditrento
Blackwood
Posts: 585
Joined: Thu May 05, 2016 9:50 am

Re: Cherry and WRC Parlour sprectra question

Post by lamanoditrento » Mon Oct 31, 2016 9:20 am

What phone app are you using Francis?
Trent

User avatar
Francis
Myrtle
Posts: 74
Joined: Sat May 28, 2016 1:44 am
Location: Kingstone, Hereford. UK
Contact:

Re: Cherry and WRC Parlour sprectra question

Post by Francis » Mon Oct 31, 2016 9:28 am

Phone app is: Spectrum Analyze (found a link on this site - somewhere...)

Few more traces with a narrower range:
Image

Red traces are front plate tapped at bridge position - yellow on back plate opposite the bridge position.
This is just finger tapping on the different points so db levels have changed each time...

User avatar
Francis
Myrtle
Posts: 74
Joined: Sat May 28, 2016 1:44 am
Location: Kingstone, Hereford. UK
Contact:

Re: Cherry and WRC Parlour sprectra question

Post by Francis » Mon Oct 31, 2016 10:10 am


User avatar
kiwigeo
Admin
Posts: 10596
Joined: Sat Sep 29, 2007 5:57 pm
Location: Adelaide, Sth Australia

Re: Cherry and WRC Parlour sprectra question

Post by kiwigeo » Mon Oct 31, 2016 10:29 am

johnparchem wrote:Do you think the 209 Hz is the top? With a parlor I suspect the 239 Hz is the top resonance T(1,1)2 before the bridge and strings. Also the 239 Hz peak is taller than the 209 Hz. I wonder if the back resonance is lower than the top. Nice looking guitar.
I just did a quick tap test on my parlour with results as follows:

T(1,1)1 - 110.5Hz
T(1,1)2 - 207Hz
T(1,1)3 - (back) 269.6Hz (top not coupling with back at this stage).
Martin

johnparchem
Blackwood
Posts: 547
Joined: Mon Jan 21, 2013 2:59 am
Location: Seattle
Contact:

Re: Cherry and WRC Parlour sprectra question

Post by johnparchem » Mon Oct 31, 2016 11:14 am

kiwigeo wrote:
johnparchem wrote:Do you think the 209 Hz is the top? With a parlor I suspect the 239 Hz is the top resonance T(1,1)2 before the bridge and strings. Also the 239 Hz peak is taller than the 209 Hz. I wonder if the back resonance is lower than the top. Nice looking guitar.
I just did a quick tap test on my parlour with results as follows:

T(1,1)1 - 110.5Hz
T(1,1)2 - 207Hz
T(1,1)3 - (back) 269.6Hz (top not coupling with back at this stage).
Is that stung up or just closed?

User avatar
kiwigeo
Admin
Posts: 10596
Joined: Sat Sep 29, 2007 5:57 pm
Location: Adelaide, Sth Australia

Re: Cherry and WRC Parlour sprectra question

Post by kiwigeo » Mon Oct 31, 2016 11:54 am

johnparchem wrote:
kiwigeo wrote:
johnparchem wrote:Do you think the 209 Hz is the top? With a parlor I suspect the 239 Hz is the top resonance T(1,1)2 before the bridge and strings. Also the 239 Hz peak is taller than the 209 Hz. I wonder if the back resonance is lower than the top. Nice looking guitar.
I just did a quick tap test on my parlour with results as follows:

T(1,1)1 - 110.5Hz
T(1,1)2 - 207Hz
T(1,1)3 - (back) 269.6Hz (top not coupling with back at this stage).
Is that stung up or just closed?
Bridge on strung up with strings damped.
Martin

johnparchem
Blackwood
Posts: 547
Joined: Mon Jan 21, 2013 2:59 am
Location: Seattle
Contact:

Re: Cherry and WRC Parlour sprectra question

Post by johnparchem » Mon Oct 31, 2016 1:34 pm

I have found as much as a 20 Hz drop after gluing on the bridge and putting strings on a steel string. His 209 Hz is certainly in the range for a small body guitar for the T(1,1)2

User avatar
Steve.Toscano
Blackwood
Posts: 489
Joined: Thu Feb 07, 2013 11:43 pm
Location: Port Stephens NSW

Re: Cherry and WRC Parlour sprectra question

Post by Steve.Toscano » Mon Oct 31, 2016 1:46 pm

Did you close over those string holes in the top when tapping? One of your peaks could be an air freq coming from those holes if the phone is pointed at them...
Also i find i dont get good results with finger tapping, for a quick and easy tapper try an eraser on a skewer, just round over one end of the eraser to very blunt point.

jeffhigh
Blackwood
Posts: 1536
Joined: Thu Feb 07, 2008 5:50 am
Location: Caves Beach, NSW
Contact:

Re: Cherry and WRC Parlour sprectra question

Post by jeffhigh » Mon Oct 31, 2016 2:15 pm

Upper bout soundport is going to raise the air resonance and consequently the others.

User avatar
Francis
Myrtle
Posts: 74
Joined: Sat May 28, 2016 1:44 am
Location: Kingstone, Hereford. UK
Contact:

Re: Cherry and WRC Parlour sprectra question

Post by Francis » Mon Oct 31, 2016 9:41 pm

Many thanks for the responses guys. The bridge pin holes were open and the sound-port too. So will have another go closing these and make a 'tapper' rather than the Mk 1 finger tip.
TBC...

User avatar
Francis
Myrtle
Posts: 74
Joined: Sat May 28, 2016 1:44 am
Location: Kingstone, Hereford. UK
Contact:

Re: Cherry and WRC Parlour sprectra question

Post by Francis » Tue Nov 01, 2016 12:32 am

Following the above comments I've closed the bridge pin and sound port holes, made a tapper and re-recorded sets of data at shorter scale ranges to get more precise peaks - Image

The upper frequencies (209.95 and 236.87 Hz) have remained the same, the lower frequency has dropped from 123.82 to 118.43 Hz with the aperture closures.
Need to go away and read more from 'the book' to get a better understanding of these graphics.
Cheers Guys

User avatar
Francis
Myrtle
Posts: 74
Joined: Sat May 28, 2016 1:44 am
Location: Kingstone, Hereford. UK
Contact:

Re: Cherry and WRC Parlour sprectra question

Post by Francis » Tue Nov 01, 2016 6:36 am

Having a few problems with the phone app so downloaded a PC prog., to look at the spectra - notes on the images:
Front plate tap traces:
Image
Back plate tap traces:
Image

Comments welcome

johnparchem
Blackwood
Posts: 547
Joined: Mon Jan 21, 2013 2:59 am
Location: Seattle
Contact:

Re: Cherry and WRC Parlour sprectra question

Post by johnparchem » Tue Nov 01, 2016 7:29 am

That looks more normal, so it looks like your Main top is at 230 Hz, after it is bound with a bridge and strung up it may be around 210. That is where my small guitars end up. I do see that 209 ish peak in the white back tap test.

Post Reply

Who is online

Users browsing this forum: No registered users and 294 guests