Ukelele bridge support

Talk about musical instrument construction, setup and repair.

Moderators: kiwigeo, Jeremy D

Post Reply
Pat.Hawkins
Myrtle
Posts: 76
Joined: Thu Mar 13, 2014 1:30 pm
Location: Lower Barrington

Ukelele bridge support

Post by Pat.Hawkins » Mon Oct 05, 2015 5:24 pm

Hi Folks,
Just a hypothetical question ...............:)

If a person forgot to glue in the bridge plate on a tenor uke, then realised after the bodies (yes - Plural) were sealed what would be the consequences?

One is a Huon Pine soundboard and the other is a King Billy.

Hypothetically - that is.

Cheers

User avatar
kiwigeo
Admin
Posts: 10593
Joined: Sat Sep 29, 2007 5:57 pm
Location: Adelaide, Sth Australia

Re: Ukelele bridge support

Post by kiwigeo » Mon Oct 05, 2015 5:32 pm

Since you're dealing with a nylon string you'd probably get away without the bridge plate from a structural point of view.
What's the bracing layout under your top?
Martin

User avatar
Allen
Blackwood
Posts: 5252
Joined: Thu Oct 11, 2007 5:39 pm
Location: Cairns, Australia
Contact:

Re: Ukelele bridge support

Post by Allen » Mon Oct 05, 2015 8:44 pm

If your fan braces are up to the task, you might be safe. The bridge patch on a tenor can be very small as mine are and only used to help reinforce the soundboard for the strings. I use pins like in a guitar.

If on the other hand it was an integral part of the bracing structure, you best keep these ones around to observe what happens for a few months at least.
Allen R. McFarlen
https://www.brguitars.com
Facebook
Cairns, Australia

User avatar
kiwigeo
Admin
Posts: 10593
Joined: Sat Sep 29, 2007 5:57 pm
Location: Adelaide, Sth Australia

Re: Ukelele bridge support

Post by kiwigeo » Mon Oct 05, 2015 8:57 pm

If you find there are issues due to lack of the bridge plate then you might consider replacing the existing bridge with a stiffer bridge consisting of layers of wood and carbon fibre. The CF supplies stiffness but not at the expense of added mass.
Martin

Pat.Hawkins
Myrtle
Posts: 76
Joined: Thu Mar 13, 2014 1:30 pm
Location: Lower Barrington

Re: Ukelele bridge support

Post by Pat.Hawkins » Wed Oct 07, 2015 2:39 pm

The bracing would be .....(theoretically) three Tas blackwood fan braces from the cross brace to just short of the very back.

Does this improve the odds?

Thanks for the replies.

User avatar
Allen
Blackwood
Posts: 5252
Joined: Thu Oct 11, 2007 5:39 pm
Location: Cairns, Australia
Contact:

Re: Ukelele bridge support

Post by Allen » Wed Oct 07, 2015 8:54 pm

Simply no idea. If the top is thick enough you don't even need braces......but it will sound like a bench top. Same goes if the braces are too heavy. There would be lots of instruments out there without bridge patches that work just fine. Even lots of ukes like soprano's that didn't have bridge patches or braces.....though they didn't fair too well.

If taking the back off and working on the soundboard isn't an option, then toss a coin and decide if you want to go ahead with the work to complete, or put it through the band saw and start again.
Allen R. McFarlen
https://www.brguitars.com
Facebook
Cairns, Australia

User avatar
hooked
Kauri
Posts: 39
Joined: Tue Nov 27, 2012 12:23 pm
Location: Paradise Beach Vic
Contact:

Re: Ukelele bridge support

Post by hooked » Fri Oct 09, 2015 7:24 am

Pat,

Because you have fan bracing in place my belief is the soundboard will remain mechanically stable. If they were my ukes I would not be concerned...theoretically!

Cheers

Daryl

Post Reply

Who is online

Users browsing this forum: Google and 129 guests