Machine bushings

Lex · Post by **Lex** » Thu Jul 30, 2015 12:34 pm

Hi all, I'm helping a friend get an old guitar playable, (sentimental value). the tuners are obviously cheap and have a bushing that presses into the headstock rather than nut and washer, does anyone know where I might find these machine heads or the bushings . Thanks Tod G

: 20150728_095910.jpg (81.19 KiB) Viewed 4922 times

: 20150728_095905.jpg (81.31 KiB) Viewed 4922 times

Bob Connor · Post by **Bob Connor** » Thu Jul 30, 2015 1:22 pm

How about these?

http://www.lmii.com/products/mostly-not ... ge-noimage

: TUNERGotohOpenGearGCN1nickel500.jpg (19.56 KiB) Viewed 4909 times

Nick · Post by **Nick** » Thu Jul 30, 2015 4:31 pm

What size is the tuner shaft and bush diameter or the brand of guitar Tod ? I have various odds and sod sets I've taken out of various guitars over the years. I can send you a set for the cost of postage across the Tassy if you're interested?

Lex · Post by **Lex** » Fri Jul 31, 2015 4:51 pm

Thanks Bob, they are nice and would be the way I would go,however the guitars owner would like to keep it as original as possible, so therefore Nicks offer it is. thanks very much Nick,I will PM the dimensions asap

Cheers Tod

Australian/New Zealand Luthiers Forum

Machine bushings

Machine bushings

Re: Machine bushings

Re: Machine bushings

Re: Machine bushings

Who is online