Rock Maple Body Blanks? Where to buy / alternate tonewoods?

Talk about musical instrument construction, setup and repair.

Moderators: kiwigeo, Jeremy D

Post Reply
User avatar
Cloverfield
Kauri
Posts: 34
Joined: Tue Jun 23, 2015 10:08 am
Location: Southbank, Vic

Rock Maple Body Blanks? Where to buy / alternate tonewoods?

Post by Cloverfield » Wed Jul 29, 2015 2:59 pm

Hi guys,

I've been searching locally for a thick solid body blank made from Eastern Hard Rock Maple, would it be fair to say finding one locally would be next to impossible?

It would seem even finding one in the US is not as easy as it seems.
~~~Simon

User avatar
demonx
Blackwood
Posts: 1395
Joined: Sat Jul 14, 2012 6:55 pm
Location: Ballarat Victoria
Contact:

Re: Rock Maple Body Blanks? Where to buy / alternate tonewoods?

Post by demonx » Wed Jul 29, 2015 4:04 pm

I used to buy a lot of my Maple from AFT. Shame more people didn't buy from them as they went out of business. Same with my local supplier. Recently closed his doors due to the industry changing.

You can try Matthews timber in Melbourne, but any time I buy from there sight unseen I get crap sent to me, so it's probably best to go there in person.

I'm guessing this is the sort of thing you're wanting, it's quite heavy, an all maple guitar.

Image

User avatar
Nick
Blackwood
Posts: 3641
Joined: Thu Feb 26, 2009 11:20 am
Location: Christchurch, New Zealand
Contact:

Re: Rock Maple Body Blanks? Where to buy / alternate tonewoods?

Post by Nick » Wed Jul 29, 2015 4:49 pm

As Allan pointed out, a solid maple body in that thickness would certainly have some weight in it! You could always chamber it and then add a cap either on the front or rear (ala Rickenbacker 300 series). Not sure about Oz, but rock maple is avaiable in 50mm thick boards from specialist suppliers here in NZ so if we can get it I'd be surprised if it wasn't available over your side of the ditch. You will probably have to glue up two pieces to get the width, finding a board wide enough in 50 mm thickness would not only be hard to get but if you could, it would be expensive along with it!
"Jesus Loves You."
Nice to hear in church but not in a Mexican prison.

User avatar
Cloverfield
Kauri
Posts: 34
Joined: Tue Jun 23, 2015 10:08 am
Location: Southbank, Vic

Re: Rock Maple Body Blanks? Where to buy / alternate tonewoods?

Post by Cloverfield » Wed Jul 29, 2015 5:00 pm

Hey thanks Allan, I might hit up Matthew's Timbre and see what they have.

The guitar in that photo is very nice btw :cl it's kind of in line with what I am looking at doing.

I do want to make an all maple body guitar, but I'm thinking semi-hollow - so a hogged out body with a maple carve top.

Seems like finding nice maple is really tricky, I much more prefer the plain style maple like in your photo, rather than the highly flamed PRS tops that seem to be more popular.

In my eyes this one is the most beautiful.

Play this on HD

https://www.youtube.com/watch?v=Ef9R-AKlFdQ
~~~Simon

User avatar
Cloverfield
Kauri
Posts: 34
Joined: Tue Jun 23, 2015 10:08 am
Location: Southbank, Vic

Re: Rock Maple Body Blanks? Where to buy / alternate tonewoods?

Post by Cloverfield » Wed Jul 29, 2015 5:12 pm

Nick wrote:As Allan pointed out, a solid maple body in that thickness would certainly have some weight in it! You could always chamber it and then add a cap either on the front or rear (ala Rickenbacker 300 series). Not sure about Oz, but rock maple is avaiable in 50mm thick boards from specialist suppliers here in NZ so if we can get it I'd be surprised if it wasn't available over your side of the ditch. You will probably have to glue up two pieces to get the width, finding a board wide enough in 50 mm thickness would not only be hard to get but if you could, it would be expensive along with it!
Hey nick, yeah I am most definitely looking to have it chambered with a cap, and as you say, the body will have to be from two pieces - no problems there.

I'd also like to try the same approach with white limba (Korina) with both body and top. Of course if all these options prove to complicated I will likely just go with a mahogany body / maple top.
~~~Simon

User avatar
J.F. Custom
Blackwood
Posts: 779
Joined: Fri May 01, 2009 9:13 pm
Location: Brisbane
Contact:

Re: Rock Maple Body Blanks? Where to buy / alternate tonewoods?

Post by J.F. Custom » Wed Jul 29, 2015 10:11 pm

Hi Simon.

I've got a bit of Rock Maple stashed away, figured and plain. Old stock I've had for over 15 years. I can check dimensions etc for anything suitable and let you know if you're really keen.

Let me know.

Cheers,

Jeremy.

User avatar
Cloverfield
Kauri
Posts: 34
Joined: Tue Jun 23, 2015 10:08 am
Location: Southbank, Vic

Re: Rock Maple Body Blanks? Where to buy / alternate tonewoods?

Post by Cloverfield » Fri Jul 31, 2015 10:00 am

J.F. Custom wrote:Hi Simon.

I've got a bit of Rock Maple stashed away, figured and plain. Old stock I've had for over 15 years. I can check dimensions etc for anything suitable and let you know if you're really keen.

Let me know.

Cheers,

Jeremy.
Thanks Jeremy, I'm interested for sure. I'll shoot you an email!
~~~Simon

Post Reply

Who is online

Users browsing this forum: No registered users and 154 guests