Milburn FP tutorial

Talk about musical instrument construction, setup and repair.

Moderators: kiwigeo, Jeremy D

Post Reply
seeaxe
Blackwood
Posts: 768
Joined: Thu Dec 18, 2008 7:20 pm
Location: Auckland NZ

Milburn FP tutorial

Post by seeaxe » Wed Jun 24, 2015 11:58 am

Hi all, from chilly Auckland

Would anyone know where I can get my hands on a copy of this often quoted reference? I have been googling but the site is gone. I need to learn how to FP to finish a guitar for a mate who passed away before he completed it - the back is done but the sides and top are not.

Cheers
Richard

seeaxe
Blackwood
Posts: 768
Joined: Thu Dec 18, 2008 7:20 pm
Location: Auckland NZ

Re: Milburn FP tutorial

Post by seeaxe » Wed Jun 24, 2015 12:05 pm

Stop looking everyone :)
Google fail on my part, found what I needed 5 mins after posting...
have a nice day!
Richard

User avatar
kiwigeo
Admin
Posts: 10593
Joined: Sat Sep 29, 2007 5:57 pm
Location: Adelaide, Sth Australia

Re: Milburn FP tutorial

Post by kiwigeo » Wed Jun 24, 2015 12:20 pm

Martin

User avatar
kiwigeo
Admin
Posts: 10593
Joined: Sat Sep 29, 2007 5:57 pm
Location: Adelaide, Sth Australia

Re: Milburn FP tutorial

Post by kiwigeo » Wed Jun 24, 2015 12:22 pm

Ok ya found it....didnt read your second post.

The Milburn tutorial is good but keep in mind FP is one of those processes where everybody develops their own technique.....Mine started with the Milburn technique but its morphed along the way with input from many other people.
Martin

seeaxe
Blackwood
Posts: 768
Joined: Thu Dec 18, 2008 7:20 pm
Location: Auckland NZ

Re: Milburn FP tutorial

Post by seeaxe » Wed Jun 24, 2015 4:09 pm

Thanks Martin

Apparently there is a part missing from the weblink, on levelling, which I found through the OLF
I have always thought that rattle cans were easier and they might be but this is a bit different as I need to finish what is started. Plus my last few efforts with cans have been a disaster, not sure why as the first few were fine. Anyway, always good to extend your skills though so I am sort of looking forward to it.

I like the way the Milburn tute starts....

"No doubt, as you gain experience, you will make discoveries and incorporate those ideas into your own methods. Remember, many skills and disciplines are accomplished in many different ways".

I suspect "make discoveries" is code for f*** ups!!

From what I have seen/read previously, am I right in thinking that I should start with fresh packet of shellac and some kind of upper class alchohol (I have lots of pinot noir, dont suppose that counts???), not just meths? Where do kiwi FPers buy their hooch?

And do most people use blonde shellac?

Cheers
Richard

Dave M
Blackwood
Posts: 597
Joined: Tue Jul 15, 2014 6:44 am
Location: Somerset UK

Re: Milburn FP tutorial

Post by Dave M » Wed Jun 24, 2015 6:49 pm

I'd go for the Malbec. The extra body should build quicker.
------------------
Dave

User avatar
Nick
Blackwood
Posts: 3642
Joined: Thu Feb 26, 2009 11:20 am
Location: Christchurch, New Zealand
Contact:

Re: Milburn FP tutorial

Post by Nick » Thu Jun 25, 2015 5:37 am

seeaxe wrote:Hi all, from chilly Auckland
:lmao :lmao :lmao

sitting here with an external temp of -3 at the mo Richard.
10351399_1657741801104323_7207740362567656237_n.jpg
-20 in Omarama (further south) Tuesday morning with a high of -5 that day.
"Jesus Loves You."
Nice to hear in church but not in a Mexican prison.

lauburu
Blackwood
Posts: 229
Joined: Sun Oct 17, 2010 7:25 am
Location: Auckland NZ

Re: Milburn FP tutorial

Post by lauburu » Thu Jun 25, 2015 5:43 am

Yep. That top photo is definitely Auckland. Look at the footpaths. Rates due to go up another 10% this year.
Miguel

seeaxe
Blackwood
Posts: 768
Joined: Thu Dec 18, 2008 7:20 pm
Location: Auckland NZ

Re: Milburn FP tutorial

Post by seeaxe » Thu Jun 25, 2015 6:51 am

Haha, but you mainlanders don't seem to realise ....those ladies' coffee will be going cold :shock: :shock: And I notice the school boys have longs AND shoes on. Must be really cold.

I'll try the Malbec on myself first before the guitar, purely in the interests of science of course.
Richard

seeaxe
Blackwood
Posts: 768
Joined: Thu Dec 18, 2008 7:20 pm
Location: Auckland NZ

Re: Milburn FP tutorial

Post by seeaxe » Thu Jun 25, 2015 4:49 pm

I can get denatured ethanol fairly easily. I have read that is the same as denatured alcohol. Any thoughts? Am I overthinking this and should be just using meths?
Cheers
Richard

Kev3
Blackwood
Posts: 117
Joined: Fri Oct 12, 2012 12:35 pm
Location: Townsville, Queensland

Re: Milburn FP tutorial

Post by Kev3 » Thu Jun 25, 2015 5:52 pm

seeaxe wrote:I can get denatured ethanol fairly easily. I have read that is the same as denatured alcohol. Any thoughts? Am I overthinking this and should be just using meths?
Cheers
To keep it brief.
Shellac is dissolved in ethanol. "Alcohol" encompasses a huge range of other chemistries. Denatured means it's been cleaned up removing most other stuff including most of the water but that only gets it to about 95/96%. Too much water and you'll get a fogged look on the finish.
Meths is ethanol but with other stuff added to make it taste awful to get round high taxes etc with alcohol and to stop idiots from trying to drink something that'll kill them :D
Purists would say you need 100% ethanol.
Industrial meths is often higher grade, but others here have used bog standard meths and don't appear to have issues.
Side note. Unless you keep a molecular sieve in with your 100%, it'll happily suck up moisture from the atmosphere and won't stay 100% for long :cry:
...............
Kevin

dshaker
Myrtle
Posts: 77
Joined: Sat Aug 31, 2013 6:38 am
Location: Palo Alto, California

Re: Milburn FP tutorial

Post by dshaker » Sun Jun 28, 2015 2:53 am

If you have the Gore books, read Trevor's method for French polish. I followed his method and it worked fine and didn't take all that long.
-Doug Shaker

seeaxe
Blackwood
Posts: 768
Joined: Thu Dec 18, 2008 7:20 pm
Location: Auckland NZ

Re: Milburn FP tutorial

Post by seeaxe » Sun Jun 28, 2015 4:47 pm

Thanks kev and Doug

I'm assuming I need to get meths that doesn't have the purple dye in it.. I've seen it somewhere.

I haven't yet invested in "the books".....one day. I have the milburn tute once..need to read it again and make a bit more effort to understand.

Have picked up some shellac and a little d/n ethanol so have a start point.

Thanks all, I'll keep you posted!!

Cheers
Richard

User avatar
kiwigeo
Admin
Posts: 10593
Joined: Sat Sep 29, 2007 5:57 pm
Location: Adelaide, Sth Australia

Re: Milburn FP tutorial

Post by kiwigeo » Sun Jun 28, 2015 5:26 pm

seeaxe wrote:Thanks kev and Doug

I'm assuming I need to get meths that doesn't have the purple dye in it.. I've seen it somewhere.

I haven't yet invested in "the books".....one day. I have the milburn tute once..need to read it again and make a bit more effort to understand.

Have picked up some shellac and a little d/n ethanol so have a start point.

Thanks all, I'll keep you posted!!

Cheers
Richard,

Correct the meths should not have the purple dye in it. Also make sure youre not using those horrible orange shellac flakes from Bunnings....
Martin

seeaxe
Blackwood
Posts: 768
Joined: Thu Dec 18, 2008 7:20 pm
Location: Auckland NZ

Re: Milburn FP tutorial

Post by seeaxe » Wed Dec 02, 2015 7:09 pm

Thanks for everyone's input re the FP.

I delivered the finished guitar to my mates family, they were really happy to see it finished.

The french polish experience for me was great, turned out pretty well or at least I was really pleased with it, and the whole process. Have since purchased a bunch more shellac and necessary bits and pieces for the next challenge!

Cheers

Richard
Richard

Post Reply

Who is online

Users browsing this forum: No registered users and 221 guests