I have a neck which has been profile shaped from a slash guitar and modified into a f...r design for a customer.
Customer has decided to go slightly thicker and is paying accordingly for it, its going to go in the bin otherwise,
I dont have room for stuff laying around and thought maybe some others may want it
We have a few repairers and stores visit and they usually empty my bins for me of all these goodies
Pay postage and its yours
Maple
Slash rear profile (similiar to a C) I actually laser scanned a genuine neck profile in to work with
44mm wide at the nut (actually 44.6) but 1/2 a mm wider for sanding up
17mm thick at nut
19mm thick at 17th
Headstock 14mm thick
21mm Heel thickness
Top Routed for truss rod
Make it fair need to be a member of 6mths or more
Anyone need a slash f neck
Anyone need a slash f neck
- Attachments
-
- f slash 3.JPG (183.1 KiB) Viewed 5966 times
-
- f slash 2.JPG (158.72 KiB) Viewed 5966 times
-
- f slash 1.JPG (168.48 KiB) Viewed 5969 times
Last edited by simso on Tue Sep 09, 2014 7:29 pm, edited 1 time in total.
Re: Anyone need a slash f neck
I'll take it off your hands Steve.
Thanks
Thanks
Re: Anyone need a slash f neck
Done, that was fast.
Send it down when I do that laser template as well
Send it down when I do that laser template as well
Re: Anyone need a slash f neck
Cool and froodie
-
- Blackwood
- Posts: 414
- Joined: Sun Oct 26, 2008 2:27 pm
- Location: Melbourne (Ringwood), Australia
Re: Anyone need a slash f neck
if you don't mind me asking, what are the black pencil looking thingos in the centre block in your opening pic? Don't recognise them and am curious. Frank
Re: Anyone need a slash f neck
They are reamers in 0.1mm increments from 2mm to 11mm
It allows us to rough drill a hole with a drill bit, and then ream it to an exact size to finish
It allows us to rough drill a hole with a drill bit, and then ream it to an exact size to finish
Who is online
Users browsing this forum: No registered users and 96 guests