Does anyone know of any distributors of Vulcan Cartridge Heaters in Australia?
We've trashed our bending iron and I have a part number of the heater but a search on the net shows up nothing as to where I might purchase one of these.
I can get to www.vulcanco.com who are the manufacturers in the States but they don't sell direct and there are no distributor lists on the site.
I reckon I'll have to try and find somewhere in the States to order one but I've turned up zilch so far.
Cheers
Bob
Ibex Bending iron replacement heater
- Bob Connor
- Admin
- Posts: 3132
- Joined: Mon Jul 09, 2007 9:43 pm
- Location: Geelong, Australia
- Contact:
- ozziebluesman
- Blackwood
- Posts: 1529
- Joined: Wed Oct 10, 2007 9:12 am
- Location: Townsville
- Contact:
Hello Bob,
I had all sorts of trouble with my new Ibex bending iron some months ago. I bought mine from LMI and they have the 110 volt and 220 volt elements for $30
Here is the link
http://www.lmii.com/CartTwo/thirdproduc ... nding+Iron
If you need an element in a hurry I have a 110 volt element that LMI sent me by mistake when my original iron shit itself. They ended up sending me the right 220 volt element in the end. The 110 volt element will work but may not get hot enough. If you want me to send it on down let me know.
Cheers
Alan
I had all sorts of trouble with my new Ibex bending iron some months ago. I bought mine from LMI and they have the 110 volt and 220 volt elements for $30
Here is the link
http://www.lmii.com/CartTwo/thirdproduc ... nding+Iron
If you need an element in a hurry I have a 110 volt element that LMI sent me by mistake when my original iron shit itself. They ended up sending me the right 220 volt element in the end. The 110 volt element will work but may not get hot enough. If you want me to send it on down let me know.
Cheers
Alan
- Bob Connor
- Admin
- Posts: 3132
- Joined: Mon Jul 09, 2007 9:43 pm
- Location: Geelong, Australia
- Contact:
- Bob Connor
- Admin
- Posts: 3132
- Joined: Mon Jul 09, 2007 9:43 pm
- Location: Geelong, Australia
- Contact:
Who is online
Users browsing this forum: No registered users and 162 guests