Advice on neck repair

Talk about musical instrument construction, setup and repair.

Moderators: kiwigeo, Jeremy D

Post Reply
Pappy Green
Beefwood
Posts: 26
Joined: Sat Feb 26, 2011 5:24 pm

Advice on neck repair

Post by Pappy Green » Fri Dec 06, 2013 10:44 am

Hi all,
wondering if I can get some advice. I have been asked to repair a banjo neck that was damaged on a flight. It looks pretty clean (haven't seen it up close). Are there any specific tips from the greater font of wisdom?

thanks
Attachments
banjo break.jpg
banjo break.jpg (62.21 KiB) Viewed 11561 times

Kev3
Blackwood
Posts: 117
Joined: Fri Oct 12, 2012 12:35 pm
Location: Townsville, Queensland

Re: Advice on neck repair

Post by Kev3 » Fri Dec 06, 2013 11:12 am

Never tried a repair on this type of thing, but it looks like a pretty clean separation of the finger joint from that picture. - More like the glue failed with minor breakage of the timber at the extremes of the "fingers"
...............
Kevin

User avatar
rocket
Blackwood
Posts: 1210
Joined: Thu Apr 30, 2009 8:43 pm
Location: melbourne,, outer east
Contact:

Re: Advice on neck repair

Post by rocket » Fri Dec 06, 2013 11:28 am

A finger jointed neck? Now I've seen it all
Rod.
Like I said before the crash, " Hit the bloody thing, it won't hit ya back

www.octiganguitars.com

Kev3
Blackwood
Posts: 117
Joined: Fri Oct 12, 2012 12:35 pm
Location: Townsville, Queensland

Re: Advice on neck repair

Post by Kev3 » Fri Dec 06, 2013 2:04 pm

Yep, pretty sure its some sort of finger joint - check out this pic
gtparlscoop_tuners_thumb.jpg
gtparlscoop_tuners_thumb.jpg (19.89 KiB) Viewed 11535 times
...............
Kevin

jeffhigh
Blackwood
Posts: 1536
Joined: Thu Feb 07, 2008 5:50 am
Location: Caves Beach, NSW
Contact:

Re: Advice on neck repair

Post by jeffhigh » Fri Dec 06, 2013 2:44 pm

Pretty common on the low end Taylors

User avatar
demonx
Blackwood
Posts: 1395
Joined: Sat Jul 14, 2012 6:55 pm
Location: Ballarat Victoria
Contact:

Re: Advice on neck repair

Post by demonx » Fri Dec 06, 2013 3:22 pm

If it ends out that the joint is un repairable, the way many broken headstocks are repaired is to cut a scarf joint and simply make a new headstock. Not as simple as a glue up, but a backup plan to keep in mind

User avatar
kiwigeo
Admin
Posts: 10594
Joined: Sat Sep 29, 2007 5:57 pm
Location: Adelaide, Sth Australia

Re: Advice on neck repair

Post by kiwigeo » Fri Dec 06, 2013 3:50 pm

"Goodtime"......... :lol:
Martin

simso
Blackwood
Posts: 1768
Joined: Mon Apr 25, 2011 10:36 pm
Location: Perth WA

Re: Advice on neck repair

Post by simso » Fri Dec 06, 2013 8:57 pm

Yeh deerings and all that use it all the time,

the thought is to maximise the contact area during glue up, usually there pretty good, they only fail at the joint if insufficient glue was used,

Just glue it up and it should be perfectly fine, (make sure old glue is removed)
Steve
Master of nothing,

Do your own repairs - http://www.mirwa.com.au/How_to_Series.html

tippie53
Myrtle
Posts: 98
Joined: Sun Nov 11, 2007 11:27 pm
Location: America
Contact:

Re: Advice on neck repair

Post by tippie53 » Sat Dec 07, 2013 1:44 am

use a glue remover like deglue or make one up with KY jelly and white vinegar . Then you can try reglueing it. I may opt here for epoxy or med ca and let clamped for 24 hr.
Member of the board ASIA
Authorized CF Martin Repair Center
http://www.bluescreekguitars.com

Bruce McC
Blackwood
Posts: 396
Joined: Thu Apr 07, 2011 1:29 pm
Location: Canberra ACT Australia

Re: Advice on neck repair

Post by Bruce McC » Sat Dec 07, 2013 10:23 am

use a glue remover like deglue or make one up with KY jelly and white vinegar
That would really make your eyes water if you got that mixed up with your personal lubricant :shock: :shock: :shock: :shock: :shock:
Bruce Mc.

simso
Blackwood
Posts: 1768
Joined: Mon Apr 25, 2011 10:36 pm
Location: Perth WA

Re: Advice on neck repair

Post by simso » Sat Dec 07, 2013 11:20 am

tippie53 wrote:use a glue remover like deglue or make one up with KY jelly and white vinegar
Today was a good day, I learnt something new again. I have never tried that recipe, but you bet I will on monday.

Thanks for the tip John

Steve
Steve
Master of nothing,

Do your own repairs - http://www.mirwa.com.au/How_to_Series.html

User avatar
kiwigeo
Admin
Posts: 10594
Joined: Sat Sep 29, 2007 5:57 pm
Location: Adelaide, Sth Australia

Re: Advice on neck repair

Post by kiwigeo » Sat Dec 07, 2013 1:04 pm

LOL.......I'm picturing a few members trying to explain to their wives why the KY jelly stocks are running low :mrgreen:
Martin

Pappy Green
Beefwood
Posts: 26
Joined: Sat Feb 26, 2011 5:24 pm

Re: Advice on neck repair

Post by Pappy Green » Sun Dec 08, 2013 9:54 pm

I am much obliged to you all for the advice. :D

Post Reply

Who is online

Users browsing this forum: No registered users and 232 guests