Neck Reinforcement

Talk about musical instrument construction, setup and repair.

Moderators: kiwigeo, Jeremy D

Post Reply
User avatar
ozziebluesman
Blackwood
Posts: 1529
Joined: Wed Oct 10, 2007 9:12 am
Location: Townsville
Contact:
Contact ozziebluesman

Neck Reinforcement

Post by ozziebluesman » Sat Apr 21, 2012 9:35 pm

I'm building the neck for another Benedetto style archtop. The previous archie build I used a one piece neck with no reinforcement. This one is five pieces laminated using Queensland Maple and Blackwood in the inner sandwich. I'm about to cut the channel for the truss rod and I was going to use two 3 x 8mm carbon fibre strips for reinforcement.

My question is do you run the carbon fibre into the fingerboard extension and if so, how far?

Cheers

Alan
"Play to express, not to impress"

Alan Hamley

http://www.hamleyfineguitars.com/
Top
Dave Stewart
Wandoo
Posts: 15
Joined: Sat Jul 30, 2011 12:45 am

Re: Neck Reinforcement

Post by Dave Stewart » Sat Apr 21, 2012 11:43 pm

Definitely into the extension Alan. I run mine in about 2 1/2". (Also helps with alignment during glueup.)
Dave
Milton, On. Canada
Top
User avatar
ozziebluesman
Blackwood
Posts: 1529
Joined: Wed Oct 10, 2007 9:12 am
Location: Townsville
Contact:
Contact ozziebluesman

Re: Neck Reinforcement

Post by ozziebluesman » Mon Apr 23, 2012 8:37 pm

Thanks Dave for the advice. I did as you suggested.

Cheers

Alan
"Play to express, not to impress"

Alan Hamley

http://www.hamleyfineguitars.com/
Top
Post Reply

Return to “Instrument Builders Forum”

Who is online

Users browsing this forum: No registered users and 283 guests