Finish sanding schedule..

Talk about musical instrument construction, setup and repair.

Moderators: kiwigeo, Jeremy D

User avatar
kiwigeo
Admin
Posts: 10839
Joined: Sat Sep 29, 2007 5:57 pm
Location: Adelaide, Sth Australia

Re: Finish sanding schedule..

Post by kiwigeo » Mon Jun 18, 2012 12:09 pm

Ormsby Guitars wrote:
kiwigeo wrote:The only time when you should go finer than 320 grit is when you're polishing a turd. :mrgreen:
Obviously I must be polishing turds...
You obviously have a very good marketing department then.. :D
Martin

Ormsby Guitars

Re: Finish sanding schedule..

Post by Ormsby Guitars » Mon Jun 18, 2012 12:15 pm

kiwigeo wrote:
Ormsby Guitars wrote:
kiwigeo wrote:The only time when you should go finer than 320 grit is when you're polishing a turd. :mrgreen:
Obviously I must be polishing turds...
You obviously have a very good marketing department then.. :D
I put heroine in the lacquer. Every client comes back for more.

MBP
Blackwood
Posts: 180
Joined: Sat Aug 20, 2011 3:48 pm

Re: Finish sanding schedule..

Post by MBP » Mon Jun 18, 2012 6:42 pm

Ormsby Guitars wrote: I put heroine in the lacquer. Every client comes back for more.
Catwoman? Heroin may be more addictive although Halle Berry did play catwoman.

For those interested I picked up 20L of 100% IMS for $80. I think the standard stuff is about $60 for 20L so not bad at all.

What grit do most manufactures recommend before applying finish

Post Reply

Who is online

Users browsing this forum: No registered users and 34 guests