New Luthier Tips du Jour video - UV curable pore filler

[Robbie O'Brien]

Here is the latest Luthier Tips du Jour video - In this video I show how to use a UV curable pore filler.
This video as well as all my other videos are available via my website, http://www.obrienguitars.com/videos , LMI's website or on youtube.

youtu.be/

[Trevor Gore]

Nice one Robbie!

I should have had a closer look at your UV set-up when I was over.

Next time...

[kiwigeo]

The North Koreans are working on a new Gamma Ray curable pore filler

nuclear-bomb.jpg (26.71 KiB) Viewed 23585 times

[simso]

Its interesting you do not use a sealer under the gel robbie.

I have had many issues with the oils coming through the gel and subsequent topcoats when curing them before putting the sealer in between the wood and gel.

Steve

[kiwigeo]

Its interesting you do not use a sealer under the gel robbie.

I have had many issues with the oils coming through the gel and subsequent topcoats when curing them before putting the sealer in between the wood and gel.

Steve

Brief caption appeared at 0:59

[simso]

Nice, I watched the video didnt read the foot notes.

Definetly needs to be sealed.

Steve

[demonx]

Brief caption appeared at 0:59

Captions must only appear if watching on a desktop as nothing comes up on my mobile, and I was paying close attention to this one as a UV setup is on my "to do" list.

[Fisherman]

This looks like a fantastic method. Any idea what the setup would cost?

[simso]

5000 odd dollars here in aus

Also uv paint, gel is shipped hazardous from america as well, so thats not cheap either for consumables.

Steve

[Fisherman]

#%! Thanks Steve

[simso]

Yes , Australia is not quite on speed yet with the uv stuff, I reckon in about 5 yrs or so it should be far better priced.

Steve

[Robbie O'Brien]

Nice one Robbie!

I should have had a closer look at your UV set-up when I was over.

Next time...

I think that can be arranged Trevor.

[nkforster]

Robbie, what's the procedure for soundboard with this stuff? No filling then just top coats?

[Robbie O'Brien]

Nigel, You will need to spray an adhesion promoter on everything, including the top.