Looking for CTS 250k linear DPDT pots

Talk about musical instrument construction, setup and repair.

Moderators: kiwigeo, Jeremy D

Post Reply
User avatar
Tim Mason
Myrtle
Posts: 84
Joined: Mon Oct 18, 2010 6:35 pm
Location: Batemans Bay NSW

Looking for CTS 250k linear DPDT pots

Post by Tim Mason » Mon Nov 08, 2010 10:20 am

You are viewing a re-constructed thread by the ANZLF recovery team. For more information click here.

"Originally Posted on:"Tue Aug 03, 2010 "

I have an idea for these 16k Seymor Duncans, but I cant find any CTS 250k linear DPDT push pull pots, and also even more scarce, 1 meg CTS linear DPDT push pulls.

The 250k's i may have found in the US, but the 1 megs are unseen :?:

Thanks for chiming in :wink:
"Strive not to succeed, but to be of value" - Albert Einstein

User avatar
Nick
Blackwood
Posts: 3627
Joined: Thu Feb 26, 2009 11:20 am
Location: Christchurch, New Zealand
Contact:

Re: Looking for CTS 250k linear DPDT pots

Post by Nick » Mon Nov 08, 2010 10:21 am

Rare as rocking horse poo I'd say, especially in linear taper configuration (most push pulls are Audio Taper as I'm sure you've found) . Why CTS specifically & why Linear? I know they have a proven track record of dependability but there are other worthy brands out there, but I'm still not hopeful of you finding the 1 Meg. Good luck with your search though.
I use these guys a fair bit, they don't list them but I'm sure if you dropped them an email they'd be able to tell you if they're even available.
"Jesus Loves You."
Nice to hear in church but not in a Mexican prison.

User avatar
Tim Mason
Myrtle
Posts: 84
Joined: Mon Oct 18, 2010 6:35 pm
Location: Batemans Bay NSW

Re: Looking for CTS 250k linear DPDT pots

Post by Tim Mason » Mon Nov 08, 2010 10:23 am

I have a theory id like to try out with a Jimmy Page wiring settup,

1 meg linear to get clarity out of hot pickups when driven into distortion, the linear part of the 1 meg vol pot is to stop that taper jump at the end of the vol roll-off, our ears need something like 5 times the sensetivity to hear linear volume rolling off/on, so at 1 meg linear workd well for volume swells :( But in a push pull, hard to find

I have bought some 250K log pots as linear is hard to find and i think audio taper will actually suit this settup better, it should cut out some of the shrill the 1 meg will give, enough though? Well lets hope i dont have to go down to 100K tone pots :wink:


This is the final re-constructed message of this topic posted by the ANZLF help team.
"Strive not to succeed, but to be of value" - Albert Einstein

Post Reply

Who is online

Users browsing this forum: No registered users and 76 guests