Australian/New Zealand Luthiers Forum

Thanks for the accolades guys. It has been a challenge getting this guitar finished and there are lots of things Ill do differently next time...list as follows: 1. listen to advice from those who know more than me is top of the list. 2. headstock scarf joint was in wrong position and is visible at b...

Okay I finally got this sucker finished....saddle got done yesterday and Kims MOP/ebony bridge pins went in and I tuned her up. She sounds nice...loud but balanced..same as the last 6 string I built. Pics arent the best..the camera's crap. http://www.anzlf.com/phpBB2/userpix/19_12_string_finished_00...

My builds are often lubricated with a good red.

Dominic wrote:Yeh, I am going to like working in there.

Hey Dom......how come theres always a bottle of beer in those photos???

Martin, are you telling me you can make guitars without beer?

Hey Dom......how come theres always a bottle of beer in those photos???

Okay today I had a deluge of bridge pins......5 sets from Hancock and co and then Kims pins arrived abut an hour later. Anyway I got all the strings on and tuned her up to pitch and even without the saddle setup she sounds great. Big Dreadie sound and balanced tonally. Even the wife was impressed..a...

Watching George's plea to the nation speech yesterday on TV I got the impression the guy couldnt even handle working a till in a deli let alone manage the finances of a nation. The guy seems inebt and way out of his depth. The warning signs of a mortgage crisis were there for some time before the fi...

bob wrote:
We're away for the weekend but we'll be back next Monday so if you want to know anything fire away

I just want to know one thing...how much does Bob want for his business???

There ya go showing off ya tools again........jeesh!!

Allen wrote:Let us know if there's anything that's of interest to us when you check them out.

Well my dental hygenist was quite interesting. She kept talking about her "girlfriend". I couldnt ask any questions of course because she was busy mucking around inside my mouth

Dentist wasnt as bad as I thought it would be. The hygenist does jewellry in her spare time and she gave me details of a place here in Adelaide to get some decent tools.

You using a Mac by any chance Colin??

Khaki shorts and shirt, Akubra hat with corks around the rim and hell be holding a can of Fosters.

Youre a bldi knob mate.

Kim wrote:Bloody hell Lillian I thought that would have been obvious to blind Ned and his dog

Martin, the bridge pins are in an express post bag and are on the way to SA, should be there in Fridays mail at the latest.

Cheers

Kim

The guitar turned out fine...the person I loaned it to 4 years ago hasnt yet given it back. oh ok, thats a bit of relief that it has been done before. we have block planes at school, and i guess im going to have to improvise the rest coz i cant really afford to buy the specialty tools. how did the g...

Okay I pulled out the saddle and infilled the slot. Ive worked out position for new slot with more angle and closer to front of bridge on treble side. Tomorrow Ill re-route the slot and hopefully all the bldi bridge pins I need will turn up and I can do a full string up and continue with setup. Neck...

Dominic wrote:
If you do this and you still pop pins, well, could be karma. Were you a bastard in a past life?
Dom

No I was a saint in my last life......Im a bastard in my current life.

Balls were bent over but not enough in a couple of the holes obviously.

Like the man in the purple long Johns says...a reamer is the best way to enlarge a hole.

Just remember to drill the holes for the tuner posts before cutting the slot and cut the slot with the head a little over thickness as it is likely that there will be some tearout on the back of the head when drilling the holes to roughly cut the slot cheers graham Important advice. To minimise tea...

You could do it with either guide bushing and a straight cutter and suitable jig or with a bearing/bit set. With the guide bushing you just have to make allowance for the bushing when positioning the jig. I bought a full set of different sized bushings for my router. Each bushing has an internal and...

Kim,

Pin popping was because I dont have ramps cut in my bridge pin holes. String was coming up to tension with ball not properly seated.......I was able to tell when the ball seated by the cracking sound the pin made as it bounced off the ceiling.

gratay wrote:thanks for that Kim..
I have heard Z-poxy is a bit more forgiving than other brands of epoxy . But I'm not taking any chances...

I can verify that.....Z-poxy is very forgiving in respect to mixing ratios.

Thanks mate. Ill pay you back in pins with next Stewmac order.

The extra pins will come in handy.....an hour ago two of the buggers shot out of the bridge on the 12 string, bounced off the ceiling and disappeared behind a pile of tonewood. That's four of the buggers that have done that so far.

Youre preaching to the converted here mate. Tim is tops in terms of product and service. Hes even been known to pick up customers from Perth Airport in a stretched limo with girls and champers in the back. Well ok there wasnt a limo and there werent any girls and champers. But he did pick up the cus...

Oh Shit! Must stop and apologise here and now. My sets came from ALLIED luthiers $10 per set deal around 3 years ago. Kim Youre not the only one having a bad day mate. After f****ng up he saddle on my 12 string this morning I went to the bldi dentist with at least three gaping holes in my pearly wh...