Search found 731 matches
- Fri Apr 16, 2021 4:56 pm
- Forum: Instrument Builders Forum
- Topic: Falcate Classical #2 Build (in NZ)
- Replies: 37
- Views: 26251
Re: Falcate Classical #2 Build (in NZ)
And thanks again. Some work to do on my deflection jig....
- Fri Apr 16, 2021 10:13 am
- Forum: Instrument Builders Forum
- Topic: detached bridge
- Replies: 5
- Views: 4957
Re: detached bridge
I was chatting to a luthier friend today (who sells lots of guitars) and mentioned your problem. He advised finding a luthier local to where the guitar is and getting him/her to fix it. Cheaper than cartage back and forth, most likely. Not ideal but more economical. For what its worth (amateur build...
- Fri Apr 16, 2021 10:05 am
- Forum: Contemporary Acoustic Guitar Design and Build - Trevor Gore
- Topic: How useful is the CF under the brace?
- Replies: 15
- Views: 37075
- Thu Apr 15, 2021 6:14 am
- Forum: Instrument Builders Forum
- Topic: Paulownia Acoustic Top
- Replies: 10
- Views: 8603
Re: Paulownia Acoustic Top
No idea sorry Matt. Assume you have googled other resources??. I think the lack of response here indicates either no-one has done it or no one would want to. Personally id thin the top wood, before joining it, to something like 5mm and tap it. If it sounds ok experiment going thinner. Once it goes a...
- Wed Apr 14, 2021 4:55 pm
- Forum: Instrument Builders Forum
- Topic: detached bridge
- Replies: 5
- Views: 4957
Re: detached bridge
Hi Jurgen Sorry to hear about the bridge. Q1. How did you prepare the soundboard and bridge for glueing? Do you mask out the soundboard before finishing the top or do you scrape back the finish to bare wood afterwards? Q2. Are those wood fibres stuck to the underside of the bridge? Strange that they...
- Wed Apr 14, 2021 5:01 am
- Forum: Instrument Builders Forum
- Topic: Falcate Classical #2 Build (in NZ)
- Replies: 37
- Views: 26251
Re: Falcate Classical #2 Build (in NZ)
Thanks Dave, now you come to mention it i do recall it. Ill go and have a look. Whether i carry on with falcate braces or not the process in the books and the ability to assess what you are doing as you go is the game changer. I definitely dont understand it all but i understand a lot more thsn i di...
- Tue Apr 13, 2021 9:59 pm
- Forum: Contemporary Acoustic Guitar Design and Build - Trevor Gore
- Topic: How useful is the CF under the brace?
- Replies: 15
- Views: 37075
Re: How useful is the CF under the brace?
Martin, you are probably thinking of section 4.4.6.1, where Trevor discusses the efficacy of putting the CF at the top and bottom of the brace - like an I beam. To quote the opening paragraph, the stiff material should be placed as far from the neutral axis as possible... and uses the example of rei...
- Tue Apr 13, 2021 8:33 pm
- Forum: Instrument Builders Forum
- Topic: Falcate Classical #2 Build (in NZ)
- Replies: 37
- Views: 26251
Re: Falcate Classical #2 Build (in NZ)
Tonight's efforts went into some bridge rotation checks and a first attempt to measure stiffness of my No.8 guitar. Ill get to No.12 tomorrow night hopefully. No.2 bridge rotation check. Unsurprisingly it only rotated 0.5 degrees. This was the first real guitar I built, from a kit so I had no idea r...
- Tue Apr 13, 2021 7:59 pm
- Forum: Contemporary Acoustic Guitar Design and Build - Trevor Gore
- Topic: How useful is the CF under the brace?
- Replies: 15
- Views: 37075
Re: How useful is the CF under the brace?
Isn't there an analogy with an I girder? I have 2x falcate braced steel string OMs in my workshop where there is no CF under the falcate braces, but CF on top only. Braces were glued to soundboard with titebond. Everything else on these guitars is the same. After 2 years there is no discernible dif...
- Mon Apr 12, 2021 6:08 pm
- Forum: Contemporary Acoustic Guitar Design and Build - Trevor Gore
- Topic: How useful is the CF under the brace?
- Replies: 15
- Views: 37075
How useful is the CF under the brace?
Going through my composite section spreadsheet looking at bracing sizes to get my EI value for the next classical guitar down to a better value, I was struck by the fact that the CF between the brace and the top is so close to the neutral axis as to have very little, I would say insignificant, effec...
- Mon Apr 12, 2021 5:52 pm
- Forum: Instrument Builders Forum
- Topic: Falcate Classical #2 Build (in NZ)
- Replies: 37
- Views: 26251
Re: Falcate Classical #2 Build (in NZ)
Apologies for the length of this next post but I'm hoping by thinking out loud, I might get some valuable input from others who have gone before me. I've got a limited supply of good tops so most of this is about trying not to waste making silly or avoidable mistakes. If you're not interested in fal...
- Mon Apr 12, 2021 4:27 pm
- Forum: Instrument Builders Forum
- Topic: Falcate Classical #2 Build (in NZ)
- Replies: 37
- Views: 26251
Re: Falcate Classical #2 Build (in NZ)
Feedback to date has been good. Helps with notes up the neck.WJ Guitars wrote: ↑Mon Apr 12, 2021 1:05 pmThe guitar build is looking great. The neck design with no heal will be an asset for playing at the body joint.
Wayne
- Mon Apr 12, 2021 4:25 pm
- Forum: Instrument Builders Forum
- Topic: Falcate Classical #2 Build (in NZ)
- Replies: 37
- Views: 26251
Re: Falcate Classical #2 Build (in NZ)
Like this
Except this time I hope to actually get it right.
- Mon Apr 12, 2021 9:44 am
- Forum: Contemporary Acoustic Guitar Design and Build - Trevor Gore
- Topic: Specific mobility
- Replies: 3
- Views: 5857
Re: Specific mobility
I have spent some time measuring the specific mobility of some of my builds How do you measure monopole mobility ? Exactly as in the books? I have the feeling that I struggled a bit with some units there. I will have to check some guitars again. Thanks! :-) A timely question! I'm about to check som...
- Mon Apr 12, 2021 9:35 am
- Forum: Instrument Builders Forum
- Topic: Falcate Classical #2 Build (in NZ)
- Replies: 37
- Views: 26251
Re: Falcate Classical #2 Build (in NZ)
A few more pictures to round out the last post Assembled, progress to date. Tuners trial fitted, neck on 20210412_111717.jpg Headstock mostly finished, needs a bit of filling and sanding 20210412_111722.jpg The neck joint, with the "cheeks" in place. These were glued on against a taped up neck so th...
- Sat Apr 10, 2021 8:59 pm
- Forum: Instrument Builders Forum
- Topic: Falcate Classical #2 Build (in NZ)
- Replies: 37
- Views: 26251
Re: Falcate Classical #2 Build (in NZ)
Well, I can think of one way to find out.... The sides are infinitely stiffer than the top as they are both laminated twice the thickness and heavily curved. So that top lining is your method of "clamping" the edges to the very stiff sides, thereby "fixing" the edge of the vibrating plate. This will...
- Sat Apr 10, 2021 11:11 am
- Forum: Instrument Builders Forum
- Topic: Falcate Classical #2 Build (in NZ)
- Replies: 37
- Views: 26251
Re: Falcate Classical #2 Build (in NZ)
Love your super thick linings John, that should give a real sturdy rim for the soundboard to vibrate off, how big are they? They look 10mm wide and 25mm deep. Have you thought about using cocktail stick instead of panel pins to line up your fretboard? You won’t have to worry about removal afterward...
- Sat Apr 10, 2021 11:05 am
- Forum: Instrument Builders Forum
- Topic: Falcate Classical #2 Build (in NZ)
- Replies: 37
- Views: 26251
Re: Falcate Classical #2 Build (in NZ)
It is fun to see the progress of your guitar. I am interested in the neck joint. I use Belleville washers to help keep the bolts tight. I like them more than a combination of a flat washer and a lock washer. A Belleville washer can stay tight through an expansion-contraction cycle. Other washers ca...
- Fri Apr 09, 2021 8:03 pm
- Forum: Instrument Builders Forum
- Topic: Falcate Classical #2 Build (in NZ)
- Replies: 37
- Views: 26251
Re: Falcate Classical #2 Build (in NZ)
Time for a bit of an update on this one. There has been progress albeit glacial. At the end of last year I glued the side laminates together and clamped them in the mould to set. That turned out pretty well and much better than my previous attempts, no significant gaps. I took a lot more time to get...
- Wed Mar 24, 2021 4:10 pm
- Forum: The Gallery
- Topic: Sitka & blackwood OM 14fret falcate
- Replies: 22
- Views: 25936
Re: Sitka & blackwood OM 14fret falcate
Lovely sound. What a cracker. You must be pretty pleased with that.
- Wed Mar 24, 2021 6:27 am
- Forum: Instrument Builders Forum
- Topic: The perils of international shipping
- Replies: 2
- Views: 4409
Re: The perils of international shipping
Hi Graham Sorry to hear about your problems. With the disclaimer that i havent had direct experience i would make a few comments. If you know all this please forgive me. The exclusion of consequential loss is very common in most insurance cover, mostly because the insurer has no idea what that might...
- Wed Feb 24, 2021 7:17 pm
- Forum: Instrument Builders Forum
- Topic: This level of confidence is scary
- Replies: 13
- Views: 13522
Re: This level of confidence is scary
I would have my heart in my mouth a few times if I did what he did, but then he's probably been doing it that way for many years. Using the tools he does is probably much quicker than faffing around setting up machines to avoid a pucker factor or two. I would have said that's just normal white glue ...
- Fri Feb 19, 2021 5:40 pm
- Forum: The Gallery
- Topic: Sitka & blackwood OM 14fret falcate
- Replies: 22
- Views: 25936
Re: Sitka & blackwood OM 14fret falcate
The only thing I don't like about that is it isn't left handed....
That's is a beautiful piece of work. Would love to hear it.
Much respect.
That's is a beautiful piece of work. Would love to hear it.
Much respect.
- Thu Jan 21, 2021 10:12 pm
- Forum: Instrument Builders Forum
- Topic: Rejigged Workshop
- Replies: 9
- Views: 9810
Re: Rejigged Workshop
I do not see a beer fridge. Obviously still a work in progress....
- Mon Jan 18, 2021 5:03 am
- Forum: Instrument Builders Forum
- Topic: Resawing in/near Auckland
- Replies: 2
- Views: 3768
Re: Resawing in/near Auckland
You would need a proper sawmill for that if you want your pieces 500 wide. I think the one at Matakana still has the mill there but last time i passed, it looked like they have shut up shop. Worth a try maybe. Otherwise try Cypress sawmill at Waitoki. If you want the laminates for guitars then its m...