Search found 7 matches

by shane77
Tue Mar 07, 2023 11:34 am
Forum: Instrument Builders Forum
Topic: Pore fill question
Replies: 21
Views: 34102

Re: Pore fill question

Thanks- agree testing would be safest... I used option 1, and sanded back to bare wood leaving only filler in the pores. I ended up pulling out too much while trying to sand across the grain (to avoid pulling out the filler), but that only resulted in more scratches for me, so I'm not sure what the ...
by shane77
Tue Mar 07, 2023 9:54 am
Forum: Instrument Builders Forum
Topic: Pore fill question
Replies: 21
Views: 34102

Pore fill question

I'm currently finishing a blackwood acoustic body... after pore-filling with Zpoxy (2 coats) and then shooting a few coats of lacquer (Mirotone 3220), I realised my pore-filling attempts were not great...I still have pinholing in areas. I've never used the Zpoxy before so I may have sanded off too m...
by shane77
Fri Oct 28, 2022 10:20 am
Forum: Instrument Builders Forum
Topic: Miratone 3220 source
Replies: 4
Views: 3581

Re: Miratone 3220 source

Thanks for the replies. 36mths... I thought it was only 24 months so that's a bit better!
I'll try local suppliers as well to see if anyone sells smaller quantities. I know the Mohawk stuff, but as you've said it's not cheap at $75/litre.
Cheers
by shane77
Thu Oct 27, 2022 4:36 pm
Forum: Instrument Builders Forum
Topic: Miratone 3220 source
Replies: 4
Views: 3581

Miratone 3220 source

Hi there- As my old tin of Durabond seems well passed it's shelf life, I would like to try out Miratone 3220 as an alternative. Does anyone know of a source for smaller quantities than the 4 litres tins? I only build at 'hobby' speed... and I don't want to buy 12 litres (3220+thinner+slow thinner) i...
by shane77
Tue Mar 01, 2022 9:32 am
Forum: Instrument Builders Forum
Topic: How to remove these marks?
Replies: 6
Views: 7166

Re: How to remove these marks?

Jim watts wrote:
Tue Mar 01, 2022 5:52 am
I'd probably bleach it and the add some tint to the lacquer to add a little color back, or possible stain the neck if you're finishing from rattle cans.
I was going to give it a light tint anyway, so I'll also look into bleach as an alternative to acid. Thanks
by shane77
Mon Feb 28, 2022 7:26 pm
Forum: Instrument Builders Forum
Topic: How to remove these marks?
Replies: 6
Views: 7166

Re: How to remove these marks?

It’s rock maple. I might give the acid a go to trial it. Just wasn’t sure if it would bleach the wood too much. Thanks
by shane77
Mon Feb 28, 2022 4:00 pm
Forum: Instrument Builders Forum
Topic: How to remove these marks?
Replies: 6
Views: 7166

How to remove these marks?

First time poster here.. I'm attempting a Tele style neck and I've stuffed up! So I'm hoping the more experienced on here could offer their advice....I was ironing out some small dents with a damp rag (which was successful), but it looks like I've also leeched some tannin across the grain with the i...