Australian/New Zealand Luthiers Forum

I had great success using a solid core door as a bench top. It was 3'x7'and I was able to get a large and small bench top out of it. I wrapped the edges with hard wood and because it didn't cost me anything I feel free to drill any manner of dog holes or screw down jigs onto the surface.
Paul

There is a plan for the headstock on page 18-6
In the Build book. -figure 18-19 -

Thanks for the link Trevor!
I am going to try f=140 on my next Tenor Ukuleles.
The last batch I did had a T(1,1)1 around 179 and a T(1,1)2 around 357
and don't sound bad at all.

I am very interested in any data for Tenor Ukulele

David
I would try a very tiny bit of acetone under a tuner.

Paul

I would be tempted to use medium CA glue. This is from another forum to glue a bridge on a Formica top: use just enough CA to cover the bottom of the bridge so there will be minimal squeeze out. glue it like you would with regular clamps and wood glue making sure to clean off any squeez out with pap...